Product Introduction
The USKYLED Acrylic LED Emergency Exit Sign is an illuminated safety indicator designed for emergency evacuation and exit identification.
The product uses an acrylic board construction and an LED light source to create a visible emergency exit indication. The current specification lists 110–220V input voltage and a 1.2V 800mA battery.
It is intended for locations where emergency exits and evacuation routes need clear visual identification, including commercial buildings, public facilities, hospitality environments and transportation-related spaces.
The product page specifically lists:
- Malls
- Supermarkets
- Hotels
- Hospitals
- Libraries
- Stations
- Entertainment venues
as application environments.
Design
Acrylic Safety Sign Construction
The product is constructed from an acrylic board, providing a lightweight sign format for illuminated emergency exit indication.
The acrylic sign structure is suitable for applications where the emergency symbol or exit information needs to remain visually identifiable in indoor public environments.
Illuminated Exit Indicator
The LED light source illuminates the emergency sign to help identify:
- Emergency exits
- Evacuation routes
- Fire escape directions
- Building passageways
- Safety exits
Compact Safety-Sign Format
Unlike a general-purpose emergency lamp, this product is primarily positioned as an exit indication sign.
This distinction is important for SEO and product positioning:
Emergency Exit Sign → Exit Identification → Evacuation Guidance
rather than:
Emergency General Lighting → Area Illumination
Main Features
- LED emergency exit sign
- Acrylic board construction
- 110–220V input
- 1.2V 800mA battery
- Bright LED light source
- Low power consumption
- Emergency evacuation application
- Exit identification function
- Green color option shown on the current product page
- Suitable for commercial and public facilities
- Suitable for fire escape and evacuation routes
- Suitable for hotels, hospitals and shopping facilities
- Designed for illuminated safety signage
The product page also states that the device has automatic detection and repair when a breakdown occurs and an automatic voice alarm reminder. Because these are manufacturer-provided page claims rather than independently verified performance data, project buyers should confirm these functions before specifying them in a formal emergency-lighting project.
Application
Emergency Exit Identification
The main application is identifying emergency exits and evacuation routes.
Suitable locations include:
- Emergency exits
- Fire escape routes
- Evacuation corridors
- Stairways
- Building passageways
- Public access areas
Hotel Emergency Lighting
The product page specifically lists hotels as an application.
Potential installation locations include:
- Hotel corridors
- Staircases
- Emergency exits
- Public areas
- Service passages
Hospital Projects
Emergency exit signs can be used in:
- Hospital corridors
- Stairways
- Emergency routes
- Public passageways
- Service areas
Shopping Mall Projects
Potential applications include:
- Shopping mall corridors
- Retail areas
- Emergency exits
- Stairways
- Evacuation routes
Supermarket Projects
The product page lists supermarkets as an application environment.
Potential locations include:
- Customer areas
- Back-of-house corridors
- Emergency exits
- Service passages
- Stairways
Library Projects
Suitable for:
- Library corridors
- Staircases
- Emergency exits
- Public passageways
Station & Transportation Projects
The product page also lists stations among the application environments.
Potential applications include:
- Passenger areas
- Corridors
- Stairways
- Emergency exits
- Public passageways
Entertainment Venues
Suitable for:
- Entertainment centers
- Public venues
- Event facilities
- Indoor corridors
- Emergency exits
Lighting Options
The current product page shows:
Green
as the selectable color.
For the current SEO page, do not add red, blue or other colors unless those variants are confirmed in Ueeshop.
Green Exit Indication
Green is the color currently shown for this product variant and should be used in image ALT and product copy where appropriate.
For regional projects requiring different exit-sign colors, symbols or directional configurations, the exact requirement should be confirmed before production.
Emergency Sign Function
The product is intended primarily for emergency exit identification and evacuation indication.
Its role can include:
- Identifying emergency exits
- Marking evacuation routes
- Supporting emergency wayfinding
- Indicating safety exits
- Improving visibility of exit signage
The current page describes the product as being designed for emergency evacuation.
Battery
The product specification lists:
Battery: 1.2V 800mA
This battery information should be retained as a product specification.
However, the current page does not state the battery backup duration.
Therefore, do not add:
- 90 minutes
- 3 hours
- 6 hours
unless USKYLED has confirmed the actual emergency duration.
Installation
The emergency exit sign should be positioned where it can be clearly seen from the relevant evacuation route.
Typical installation areas include:
- Emergency exits
- Stairway entrances
- Stair landings
- Corridors
- Fire escape routes
- Building passageways
- Public facilities
- Commercial buildings
Recommended Installation Process
- Determine the required exit location.
- Confirm the evacuation direction.
- Confirm the 110–220V electrical supply.
- Select a visible mounting position.
- Prepare the mounting surface.
- Secure the emergency exit sign using suitable hardware.
- Connect the electrical supply according to the product wiring requirements.
- Check the emergency function and indicator.
- Confirm that the sign is visible from the intended evacuation route.
Installation & Compliance Note
Emergency exit signage is safety-related equipment.
Installation should comply with the applicable local:
- Electrical regulations
- Fire-safety requirements
- Emergency-lighting standards
- Building codes
- Evacuation-signage requirements
The current page does not provide a specific certification or compliance standard. Therefore, do not add CE, UL, EN, ISO, RoHS, UL924 or other certification claims unless the actual product documentation confirms them.
Technical Specifications
| Specification |
Details |
| Product Type |
LED Emergency Exit Sign |
| Main Function |
Emergency Exit / Evacuation Indicator |
| Light Source |
LED |
| Material |
Acrylic Board |
| Material Description |
PMMC (Acrylic Board) |
| Input Voltage |
110–220V |
| Battery |
1.2V 800mA |
| Color Option |
Green shown |
| Application |
Emergency Evacuation |
| Installation |
Confirm according to project configuration |
| MOQ |
1 pcs |
| Sample Lead Time |
3–7 days |
| Mass Order Lead Time |
7–15 days |
| OEM/ODM |
Available upon project confirmation |
Project Applications
Hotel Projects
Suitable for:
- Hotel corridors
- Stairways
- Emergency exits
- Guest areas
- Public passageways
Hospital Projects
Potential applications:
- Hospital corridors
- Emergency routes
- Staircases
- Public areas
- Service corridors
Shopping Mall Projects
Suitable for:
- Retail corridors
- Shopping areas
- Staircases
- Emergency exits
- Evacuation routes
Supermarket Projects
Suitable for:
- Customer areas
- Service corridors
- Emergency exits
- Stairways
School & Public Building Projects
Potential applications include:
- School corridors
- Staircases
- Public buildings
- Emergency exits
- Evacuation passageways
Library Projects
Suitable for:
- Library corridors
- Stairways
- Emergency exits
- Public passageways
Station Projects
Potential applications include:
- Passenger areas
- Station corridors
- Stairways
- Emergency exits
- Public passageways
Entertainment Venue Projects
Suitable for:
- Entertainment centers
- Public venues
- Event facilities
- Corridors
- Emergency routes
The current product page specifically identifies malls, supermarkets, hotels, hospitals, libraries, stations and entertainment venues.
OEM/ODM
USKYLED can support OEM/ODM requirements for emergency exit sign projects, subject to product configuration and project requirements.
Potential customization areas may include:
- Sign artwork
- Exit symbol
- Arrow direction
- Language
- Housing configuration
- Acrylic material
- Color
- Input voltage
- Battery configuration
- Packaging
- Private labeling
- Logo
- Project-specific specifications
For B2B projects, buyers should provide:
- Required quantity
- Installation environment
- Input voltage
- Exit sign design
- Directional arrow
- Language
- Battery requirement
- Required backup duration
- Installation method
- Certification requirements
- Packaging requirements
USKYLED can confirm the appropriate configuration based on the project specification.
MOQ: 1 pcs
Sample Order Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days
Final lead time depends on quantity, customization and project requirements.
CTA
Looking for an LED emergency exit sign for hotel, hospital, shopping mall or commercial evacuation projects?
Contact USKYLED for samples, technical specifications, project pricing and OEM/ODM support.
Send us your required voltage, sign design, arrow direction, battery requirement, quantity and certification requirements for a B2B quotation.
