Product Introduction
The USKYLED Recessed Emergency LED Light is an embedded emergency lighting solution designed for buildings that require reliable illumination during power outages and evacuation situations.
Unlike conventional surface-mounted emergency fixtures, this model uses an embedded concealed installation method, allowing the light body to integrate into the ceiling while maintaining a relatively clean appearance.
The product combines normal lighting and emergency backup functionality with human body sensing and voice control options. When movement or the specified sound condition is detected, the sensing function can activate the light according to the selected configuration.
A built-in Ni-Cd battery provides an emergency operating time of ≥90 minutes, helping maintain illumination when the main power supply is interrupted.
The product is available in several wattage and cutout-size options, including:
- 8W — 10cm hole
- 10W — 13cm hole
- 12W — 15cm hole
- 15W — 17cm hole
The exact configuration should be selected according to the ceiling structure and project requirements.
Design
Recessed Concealed Construction
The emergency LED light is designed for embedded concealed installation, allowing the fixture to be integrated into a ceiling rather than mounted directly onto the surface.
This design is suitable for projects where the emergency lighting system needs to blend with the ceiling architecture.
Integrated Emergency Lighting
The product combines LED illumination, emergency backup and sensing functionality in an integrated fixture.
PC Flame-Retardant Housing
The lamp body uses PC flame-retardant plastic, providing a lightweight housing for indoor emergency lighting applications.
Multiple Cutout Options
Different wattage models are matched with different ceiling hole sizes, allowing the same product family to cover multiple installation requirements.
Main Features
≥90-Minute Emergency Backup
The built-in Ni-Cd battery provides an emergency operating time of at least 90 minutes according to the current product specification.
Human Body Sensing
The sensing function can detect movement within approximately 1-5 meters, helping activate emergency lighting when people move through the area.
Voice / Sound Control
The product supports a voice-control configuration. The page specifies a sound level above 50 dB for the sensing condition.
120° Sensing Angle
The sensing system provides an approximately 120° sensing angle.
Fast Emergency Conversion
The product specification states an emergency conversion time of less than 0.2 seconds.
Embedded Installation
The concealed recessed installation method is suitable for ceiling-integrated emergency lighting.
IP30 Protection
The product is specified with an IP30 protection level for its intended indoor application.
Multiple Wattage Options
Available product options include:
Application
The recessed emergency LED light can be used in indoor environments where emergency illumination is required.
Corridor Emergency Lighting
Suitable for corridors and passageways where occupants need visible lighting during a power interruption.
Staircase Emergency Lighting
Can be installed near staircases and evacuation routes to provide backup illumination.
Commercial Buildings
Suitable for offices, commercial properties and other business facilities.
Hotels
Can be used in hotel corridors, public areas, entrances and evacuation routes.
Schools
Suitable for educational buildings, corridors, classrooms and circulation areas.
Warehouses
Can be used in warehouse aisles and emergency evacuation areas.
Retail Stores
Suitable for retail environments where ceiling-integrated emergency lighting is required.
Public Buildings
Suitable for public facilities and other indoor environments requiring emergency lighting.
Residential Buildings
Can also be considered for apartment buildings and other residential indoor applications where the product specification and local requirements are suitable.
Size / Options
The current product page provides the following wattage and ceiling-hole options:
| Wattage |
Ceiling Hole |
| 8W |
10 cm |
| 10W |
13 cm |
| 12W |
15 cm |
| 15W |
17 cm |
Installation Type
Embedded concealed installation
Available Function Options
- Light On Emergency
- Human Body Sensing
- Voice Controlled
Recommended Selection
Select the wattage and hole size according to:
- Existing ceiling opening
- Required lighting output
- Installation environment
- Project design
- Emergency lighting requirements
Lighting Options
The current Ueeshop page provides three functional configurations:
Light On Emergency
Designed for emergency lighting operation during a power outage.
Human Body Sensing
The human sensing configuration detects movement and can activate the light according to the sensing settings.
The listed sensing distance is approximately:
1-5 meters
Voice Controlled
The voice-control configuration can respond to the specified sound condition.
The page lists a sound level condition of:
>50 dB
Light Sensing Control
The product specification also states a light-sensing function in which the light does not turn on when the ambient lighting condition is insufficient.
Because the current page combines several sensing/control functions, the exact behavior should be confirmed according to the selected product variant before placing a project order.
Installation
The product uses embedded concealed installation.
Basic Installation Process
- Confirm the selected wattage and ceiling hole size.
- Check the existing ceiling opening.
- Confirm the installation position.
- Prepare the electrical wiring according to the product wiring diagram.
- Install the recessed emergency light into the ceiling.
- Connect the AC power supply correctly.
- Test normal lighting operation.
- Test emergency conversion after power interruption.
- Test the selected human sensing or voice-control function.
- Confirm the emergency battery backup operation.
Important Wiring Note
The current product page describes a four-wire configuration including live, switch-live, strong-start live and neutral wiring. It also provides different wiring methods for emergency-only operation, normal lighting plus emergency operation and forced starting from backup power.
The actual wiring must follow the supplied product wiring diagram and local electrical requirements.
Technical Specifications
| Specification |
Details |
| Product Type |
Recessed Emergency LED Light |
| Installation |
Embedded Concealed Installation |
| Input / Rated Power Supply |
AC220V 50Hz |
| Light Source |
LED |
| Wattage Options |
8W / 10W / 12W / 15W |
| Battery Type |
Nickel Cadmium (Ni-Cd) |
| Emergency Time |
≥90 minutes |
| Emergency Conversion |
<0.2S |
| Housing Material |
PC Flame-Retardant Plastic |
| Protection Level |
IP30 |
| Sensing Distance |
1-5 meters |
| Sensing Angle |
120° |
| Sound Detection Condition |
>50 dB |
| Delay Time |
Approximately 5-35 seconds |
| Induction Principle |
Heat-source movement / sound control |
| Installation Height Listed |
1-5 meters |
| Function Options |
Emergency / Human Sensing / Voice Control |
| Ceiling Hole Options |
10cm / 13cm / 15cm / 17cm |
| MOQ |
1 pcs |
| Sample Lead Time |
3-7 days |
| Mass Order Lead Time |
7-15 days |
Project Applications
Office Building Projects
Recessed emergency lighting for office corridors, staircases and circulation areas.
Hotel Projects
Suitable for hotel corridors, entrances, public areas and evacuation routes.
School Projects
Can be used in school corridors, classrooms and staircase areas.
Shopping & Retail Projects
Suitable for commercial stores and retail buildings where ceiling-integrated emergency lighting is preferred.
Warehouse Projects
Can provide emergency illumination for indoor aisles and evacuation routes.
Public Building Projects
Suitable for public facilities requiring emergency and power-outage lighting.
Residential Projects
Can be used for selected residential indoor applications where recessed emergency lighting is required and local regulations permit the configuration.
Renovation Projects
The multiple ceiling-hole options make the product suitable for projects where existing recessed openings need to be matched.
OEM/ODM
USKYLED can support OEM/ODM requirements for emergency LED lighting projects.
Potential customization areas include:
- Product appearance
- Housing design
- Logo
- Packaging
- Product labeling
- Wattage configuration
- Sensing function
- Control function
- Emergency lighting configuration
- Project-specific specifications
For project inquiries, buyers should provide:
- Required wattage
- Ceiling hole size
- Installation height
- Required emergency duration
- Sensing requirement
- Voice-control requirement
- Target market
- Required certifications
- Estimated quantity
- Project deadline
USKYLED can then evaluate the required product configuration.
MOQ: 1 pcs
Sample lead time: 3-7 days
Mass order lead time: 7-15 days
CTA
Request a Recessed Emergency LED Light Sample
Looking for a recessed emergency LED light for commercial buildings, hotels, schools, corridors or evacuation routes?
USKYLED can provide:
- Sample orders
- Bulk pricing
- 8W / 10W / 12W / 15W options
- Human sensing configurations
- Voice-control configurations
- ≥90-minute emergency backup
- OEM/ODM support
- Project-based emergency lighting solutions
MOQ: 1 pcs
Sample lead time: 3-7 days
Mass order lead time: 7-15 days
Contact USKYLED for samples, technical specifications and project quotations.
LED Bulbs with High Luminous Flux
Equipped with LED bulbs, this emergency light offers a luminous flux ranging from 249-2000, ensuring bright illumination during power outages.
Durable Plastic Body Material
Constructed from durable plastic, this emergency light withstands wear and tear, offering long-lasting service.
Battery Backup Included
With batteries included, this emergency light ensures uninterrupted lighting even when the power is out.
Human Induction Feature
The human induction feature activates the light upon detection of movement, enhancing safety during evacuations.
Integrated Tube Design
The integrated tube design makes this emergency light compact and easy to install, ideal for quick setup in emergency situations.
