Product Introduction
The 24V FCOB CCT LED Strip Light is a high-density flexible LED lighting solution designed for outdoor and architectural applications where continuous illumination, adjustable white light and waterproof protection are required.
Using FCOB technology with 640 LEDs per meter, the strip creates a dense and continuous light-emitting surface. The CCT configuration allows the color temperature to be adjusted from 2700K warm white to 6000K cool white, giving lighting designers and installers flexibility to match different environments and project requirements.
The strip operates at DC24V and uses a 16W/m power configuration. With an IP68 waterproof rating, it is designed for applications where the LED strip may be exposed to moisture or outdoor environmental conditions.
The product provides a 180° viewing angle, Ra>90 color rendering and a cutting interval of approximately 25mm, allowing installers to create customized linear lighting layouts.
The standard package includes one 5-meter FCOB LED strip, while the power supply is not included.
Design
The FCOB LED strip uses a flexible linear construction designed for continuous illumination along the strip.
The high-density arrangement of 640 LEDs/m helps create a smooth light-emitting surface rather than the widely spaced appearance commonly associated with lower-density LED strips.
The strip uses a 12mm width and can be cut at approximately 25mm intervals, allowing it to fit different installation lengths and linear lighting layouts.
For outdoor installations, the waterproof rating applies to the LED strip itself. Connectors, power connections and exposed joints should be properly sealed and protected during installation.
Main Features
- FCOB LED technology
- 640 LEDs/m
- DC24V low-voltage operation
- 16W/m power consumption
- IP68 waterproof rating
- CCT adjustable from 2700K to 6000K
- Ra>90 color rendering
- 180° viewing angle
- Flexible LED strip construction
- 25mm cutting interval
- 12mm strip width
- 5m standard roll
- Suitable for outdoor and architectural lighting
- Power supply not included
- MOQ: 1 pc
- Sample order lead time: 3–7 days
- Mass order lead time: 7–15 days
The core technical specifications are based on the current product page.
Application
Outdoor Lighting
IP68 protection makes this LED strip suitable for outdoor lighting projects where the strip may encounter moisture or water exposure.
Typical applications include:
- Landscape lighting
- Garden lighting
- Outdoor decorative lighting
- Building exterior lighting
- Pathway accent lighting
- Outdoor commercial areas
Architectural Lighting
The flexible form factor can be used for architectural linear lighting where continuous illumination is required.
Potential applications include:
- Building facades
- Architectural details
- Canopies
- Outdoor structures
- Decorative architectural elements
Landscape Lighting
The adjustable CCT range allows lighting designers to select warmer or cooler white light depending on the landscape environment.
Commercial Lighting
The strip can be considered for:
- Hotels
- Restaurants
- Retail stores
- Shopping areas
- Commercial buildings
- Outdoor hospitality spaces
Size / Options
Standard Length:
LED Density:
Strip Width:
Power:
Voltage:
Cutting Interval:
Viewing Angle:
Waterproof Rating:
Package:
- 1 × 5m FCOB LED strip
- Power supply not included
These options are based on the specifications currently displayed on the product page.
Lighting Options
CCT Adjustable White
The main lighting option is adjustable white light from:
2700K → 6000K
This allows one LED strip to cover different lighting environments.
2700K Warm White
Suitable for:
- Hospitality environments
- Residential outdoor areas
- Decorative landscape lighting
- Relaxed architectural spaces
3000K–4000K
Suitable for:
- Commercial outdoor areas
- Hotels
- Restaurants
- Retail environments
- General architectural lighting
5000K–6000K Cool White
Suitable for:
- Functional outdoor lighting
- Modern architectural applications
- Commercial areas requiring a cooler white appearance
Color Rendering
Ra>90
The high color rendering specification makes the strip suitable for applications where the appearance of materials, finishes and architectural surfaces is important.
Installation
The strip is designed for flexible linear installation.
Recommended installation process:
- Measure the required installation length.
- Identify the cutting marks.
- Cut the strip at the specified 25mm interval.
- Connect the strip to a compatible DC24V power supply.
- Install a suitable CCT controller when adjustable color temperature is required.
- Secure the strip according to the project installation method.
- Properly seal all connection points for outdoor applications.
- Test the lighting before completing the installation.
Important Outdoor Installation Note
The LED strip is specified as IP68, but the electrical connections and exposed wiring also need appropriate waterproof protection.
For outdoor projects, installers should use suitable waterproof connectors, end caps, sealing materials and junction protection.
Technical Specifications
| Parameter |
Specification |
| Product Type |
FCOB CCT LED Strip Light |
| LED Technology |
FCOB / COB |
| Input Voltage |
DC24V |
| LED Density |
640 LEDs/m |
| Power Consumption |
16W/m |
| Strip Width |
12mm |
| CCT Range |
2700K–6000K |
| CRI |
Ra>90 |
| Viewing Angle |
180° |
| Waterproof Rating |
IP68 |
| Cutting Interval |
25mm |
| Standard Length |
5m |
| Working Temperature |
-20°C to +45°C |
| Storage Temperature |
-20°C to +60°C |
| Light Type |
Tunable White / CCT |
| Installation |
Flexible Linear Installation |
| Power Supply |
Not Included |
| Package |
1 × 5m LED Strip |
| MOQ |
1 pc |
| Sample Lead Time |
3–7 days |
| Mass Order Lead Time |
7–15 days |
The voltage, LED density, power, CCT range, CRI, IP rating, temperature range, viewing angle and package details are taken from the current product listing.
Project Applications
The 24V IP68 FCOB CCT LED Strip Light can be used in:
Architectural Projects
- Building facades
- Architectural details
- Canopies
- Exterior structures
- Decorative linear lighting
Landscape Projects
- Garden lighting
- Landscape features
- Outdoor paths
- Decorative planting areas
- Outdoor structures
Hospitality Projects
- Hotel exteriors
- Restaurant outdoor areas
- Resort landscaping
- Outdoor entertainment spaces
- Architectural hospitality lighting
Commercial Projects
- Retail exterior lighting
- Shopping centers
- Commercial buildings
- Storefronts
- Outdoor display areas
Residential Projects
- Villa exterior lighting
- Garden lighting
- Patio lighting
- Balcony lighting
- Outdoor decorative lighting
OEM/ODM
USKYLED can support B2B customers with FCOB LED strip sourcing and project requirements.
OEM/ODM discussions can cover:
- LED density
- Strip length
- CCT range
- Voltage configuration
- Power specification
- Waterproof requirements
- Packaging
- Product labeling
- Custom project requirements
- Bulk orders
For larger projects, buyers can provide the required installation length, CCT range, voltage, waterproof requirements and estimated quantity for quotation.
Order & Lead Time
MOQ: 1 pc
Buyers can order individual units for testing, sample approval or project evaluation.
Sample Order Lead Time: 3–7 days
Suitable for:
- Sample testing
- Project approval
- Lighting evaluation
- Installation testing
Mass Order Lead Time: 7–15 days
Suitable for:
- Wholesale orders
- Commercial projects
- Landscape projects
- Architectural lighting projects
- Distributor purchasing
Actual production and shipping schedules should be confirmed according to order quantity, configuration and destination.
CTA
Looking for a waterproof 24V CCT LED strip for outdoor or architectural lighting projects?
Contact USKYLED for samples, wholesale pricing, technical specifications and OEM/ODM requirements.
MOQ: 1 pc
Sample Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days
DM us for samples, bulk pricing or project quotations.
buy power supply
buy controller
