WS2811 led strip DC12v
Important: the light belt must be powered by DC 12V and equipped with full color controller
Package:only LED strip ,no control
Product model: WS2811 full color
Light source: SMD 5050 LED
Working voltage: DC12V
Board: FPCB black/white soft board
IC: one IC drives three LED chip
LED: each LED is controlled separately
Power consumption: maximum 0.3w per lamp bead
Gray level :256
Operating temperature: -15 to 50°
Luminous Angle: 180°
Control mode: external control
Clipping: each LED can be clipped
Color: full color RGB, dream color change 3
IC type: 5050RGB(built-out IC WS2811)
Pixels: light strip per meter (30 light /30 segment, 60 light /60 segment)
Thickness: bare plate 2mm/glue drop 3mm/sleeve 4mm
FPCB width: naked (30 light: 10mm / 60 light: 10mm )
Glue drop (30 lamp: 10mm / 60 lamp: 10mm )
Casing (30 lamp: 12mm / 60 lamp: 12mm)
Outgoing mode: SM3pin terminal head and 2 power cords
Red: 12V positive pole (VCC)
White :12V negative (GND)
Green: signal line (DATA) the two extra lines are backup power lines, red :12V positive pole/white :12V negative pole
Waterproof grade: IP30 bare board: the lamp beads exposed outside are not waterproof (there is double-sided tape on the back);
IP65 glue drop: the lamp bead is covered with high transparent resin to prevent a small amount of water splash (double-sided glue on the back)
IP67 casing: use silicone casing with good light transmission and outdoor rain protection (non-double-sided adhesive on the back) packaging: anti-static bag, naked version, double-sided adhesive on the back of drip adhesive, non-double-sided adhesive on the casing;
An IC chip controls an LED bead to form a loop. The controller controls the circuit above the FPCB circuit board through the IC chip to achieve different LED effects: chase, running, running, discoloration, breathing, flash, clockwise running, counterclockwise running, simulating lightning, etc. Cutting and welding are convenient and free: each LED can be formed into a loop, which can be cut off and welded to meet the customer’s requirements of various length of lamp strip
1.What’s the remote?
Answers :Product only led lights, do not include the controller, if need to please buy separately
2:.what controller need to for this?
Answers :Details on the top of my list some controller, of course, you can also go to my shop to see inside
3.does it come with a remote control?
Answers :only led strip,no control
4.What type a wifi controller need to me for this led?
Answers :you can use sp108e or sp501e,Details on the top of my list some controller, of course, you can also go to my shop to see inside
5.these are addressable LEDs?
Answers :yes,addressable ,with ic.
5 reviews for WS2811 Led Strip With IC Smart Driver Chip AddressAble LED Strip Light Tape Lamp Programming 30/60leds/m DC12v