led square round borderless recessed downlight embedded gypsum lamp ceiling spotlight for household living room aisle

Plaster ceiling spotlight

Lamp body is completely integrated with the ceiling
lime putty
gypsum board

classical black and white color of lampshade optional

anti glare white cover
anti glare black color

Light and ceiling are integrated, showing a sense of space

Environmental friendly plaster technology

From hand-mold engraving to grouting and degerming 6 times, polished by hand sandpaper, with smooth and delicate texture.

Replaceable light source

Easy for disassemble and maintenance

High CRI means the ideal light source for lamp which is close to sunlight

Color temperature comparison

Meet your light needs
Warm white Natural white

Product Parameter

cutout size：D110*(105-115)mm/4.33*(4.13-4.52）inches
D122*(85-115)mm/4.8*(3.34-4.52)inches
115mm（4.52inches）118mm（4.64inches） 174mm（6.85inches）
114mm（4.49inches） 120mm（4.72inches）

Product Name：Recessed Spotlight
Material：plaster+aluminum+PC
Light source：COB
Wattage:7W
Beam angle: 24°
Color:black, white
Color temperature: warm white 3000K,natural white 4000K
Cutout size:round version：D110*(105-115)mm
Square version: D122*(85-115)mm
N.W.:round version:496g square version:650g
Application：Living room，dining room，bedroom，study， etc.

Note: Hands measurement, for reference only.

The Corridor

Recommend:1-2pc lamps for aisle lighting, installation distance is 80-120cm

The Bedroom

Recommend:area:18m2,2-3pcs lamps for main lighting, installation distance is 20-40cm

The Restaurant

Recommend: 3pcs lamps for main lighting, installation distance is 20-40cm

Installation steps

1.Before the ceiling, , open the hole in advance according to the size of the lamp
2.After cleaning up the dust defects, place the embedded parts in the reserved holes on the reserved ceiling hole and fix them on the ceiling with screws
3.Fixed plasterboard( plasterboard need to open holes in advance）
4.Batch of ash handlign to cover the embedded parts.
5.After air-drying cleaned the putty, connect the reserved wires at home with the terminal block of lamp body, then tuck into the reserved hole
6.Finish installation.