If the light strip does not light up after connection, replace the V + V-connected power cord.
12v 6mmx12mm 10 W/m (with 12v transformer)
24V 10MMX 10mm 10 W/m (with 24v transformer)
24V 12mmx12mm 10 W/m (with 24v transformer)
24V 14mmx 14mm 10 W/m (with 24v transformer)
24V 16mmx16mm 15W/m (with 24v transformer)
24V 20mmx 12 mm 15W/m (with 24v transformer)
24V 30mmx 14mm 20W/m (with 24v transformer)
For example, if you buy a 24V light strip, please use a 24v transformer. According to the number of meters, try to choose a transformer with higher power.
You need to purchase a transformer separately.
After receiving the goods, you can connect the corresponding transformer to use it. Please make sure that the transformer is the same as the Volt of the light strip. If the light strip does not light up after connection, replace the V + V-connected power cord.
If you have any questions, please contact us in time.
24v 30mmx14mm :No Buckle and End Cover Other sizes have Buckle and End Cover
Flexible Waterproof Silicone LED Light Strip Silica Gel Soft Lamp Tube 1m – 5m IP67 Neon Rope LED Light Band Without Transformer
1, Professional structural design, it can achieve uniform lighting and will not appear spot.
2, It be made by good quality silica gel materials. it can work at high temperatures or bad outdoor weather.
3, This tube is not corrosive. insoluble in acidic and alkaline substances.
4, The waterproof grade of IP67 has good waterproof performance.
5, You can use it to make any shape you want, it’s soft and easy to be bent.
6, Easy to install. we will send all the fittings of the tube to you, no including screw.
1, Working Voltage: for 12V/24V lighting tape.
2, Color Temperature: 3100K±150, 4200K±200, 6200K±300.
3, Working Temperature: -20~50 °C.
4, Protection Level: IP67 waterproof.
5, Luminous Surface: even light, no light spots, soft light.
6, Number of LEDs: for 120leds/m and more.
7, Cut Port: you can see the cut position.
8, Light Blocking: blocking light, preventing light leakage.
9, Light Diffusing: diffusing and refracting light.
10, Fixed Method: aluminum clip or plastic clip.
11, Cutting Method: cut at the black mark on the side of the tube.
1, this product uses low voltage DC power supply, must use AC-DC switching power supply
Use after voltage conversion!
2. It is forbidden to connect the LED light bar directly to the AC110V or AC220V AC mains voltage. Otherwise, the light bar will be damaged and it may cause a safety accident!
1 x 1m-5m light strip ( As you choosed )
2 x End cap
1 x Fixed clip for each meter tube(Except 3014)