Ultra-Thin Flexible Magnetic Power Track System with Sliding Connector for Cabinet Lighting

The Ultra-Thin Flexible Magnetic Power Track System is a compact two-wire conductive rail solution developed for customized low-voltage power distribution in compatible cabinet, shelf and display lighting installations.

Unlike conventional rigid power rails, the flexible track offers greater freedom when planning lighting layouts around furniture, display fixtures and interior structures. Its slim 16.5 × 3.5mm profile helps reduce the space required for integrating the power distribution system into a lighting assembly.

The system includes a flexible magnetic conductive rail, sliding power pickup connector, power input connector and optional end cap.

The sliding connector provides a movable electrical pickup point along the compatible rail, allowing the position of connected lighting equipment to be adjusted within the system's mechanical and electrical limits.

Made from PC material with copper conductors, the track is intended for lighting manufacturers, furniture producers, retail display specialists and project contractors looking for a compact power distribution solution.

Design

Ultra-Thin 16.5 × 3.5mm Profile

The track features a slim cross-section measuring approximately 16.5mm in width and 3.5mm in height.

This low-profile construction is useful for lighting installations where space is limited and bulky power distribution components would interfere with the furniture or display design.

Flexible Track Construction

The flexible rail can accommodate suitable installation layouts that may be difficult to achieve with a conventional rigid track.

Its flexibility makes it relevant to customized cabinet and display structures, subject to the manufacturer's minimum bending radius and mounting requirements.

PC Housing with Copper Conductors

The main structure combines PC material and copper conductive strips.

The PC component forms the track body, while the copper conductors provide the electrical path between the power input and compatible pickup connectors.

Modular Connection System

The system consists of separate components that can be selected according to the project:

• Flexible magnetic conductive track

• Sliding magnetic power pickup connector

• Power input connector

• Optional end cap

This modular arrangement helps customers select the components required for different installation layouts.

Main Features

1. Two-Wire Conductive Power Distribution

The flexible rail uses a two-wire conductive structure designed to carry electrical power along the track.

The correct supply voltage, polarity and maximum current must be confirmed before connecting any lighting load.

2. Magnetic Sliding Power Pickup

A compatible magnetic pickup connector can be positioned along the conductive rail.

This makes the system suitable for lighting layouts where the connection point may need to be relocated during installation or later adjustment.

3. Ultra-Thin Construction

With a cross-section of approximately 16.5 × 3.5mm, the rail offers a slim alternative to larger power distribution tracks.

4. Flexible Installation Layout

The flexible track construction allows designers to consider customized arrangements for compatible furniture and display lighting projects.

Installation must remain within the approved bending and mounting limits.

5. Cut-to-Length Track

The product is presented as a cuttable flexible track system.

Track cutting should follow the manufacturer's specified method to avoid damaging the copper conductors or insulation.

6. Modular Accessories

Separate power input connectors, sliding pickup connectors and optional end caps are available.

This allows the buyer to order individual replacement components or assemble a complete track system.

7. Customization Support

The product listing indicates that customization is available.

Project buyers can contact USKYLED to discuss required track lengths, connector arrangements, wiring configurations and other manufacturing requirements.

Application

Cabinet and Display Lighting Power Distribution

The flexible magnetic power track can be considered for compatible low-voltage lighting installations in:

• Kitchen cabinets

• Wardrobes and closets

• Display cabinets

• Retail display shelves

• Jewelry showcases

• Furniture lighting systems

• Exhibition display fixtures

• Commercial shelving

• Custom interior lighting assemblies

• Modular display lighting systems

          Its slim profile is particularly relevant to projects where power distribution components need to be integrated discreetly into furniture or display structures.

Size / Options

Flexible Magnetic Conductive Rail

Component Type: Two-Wire Flexible Power Track

Material: PC + Copper Conductors

Cross-Section: 16.5 × 3.5mm

Length: Project-dependent; confirm available supply lengths.

Sliding Magnetic Power Pickup Connector

A movable connector designed to establish an electrical connection with the compatible conductive rail.

Cable, magnet and terminal configurations may vary according to the selected version.

Power Input Connector

Used to connect the compatible low-voltage power supply to the conductive track.

Optional End Cap

A finishing component for the end of the rail.

Complete Power Track Assembly

Customers can request the components required to create a complete compatible track power distribution system.

Lighting Options

Compatibility with Low-Voltage Lighting

The flexible conductive rail is a power distribution component rather than a complete LED luminaire.

It can be considered for compatible low-voltage lighting equipment when the electrical ratings, connector configuration and installation requirements are satisfied.

Cabinet LED Lighting

Suitable for evaluation in customized cabinet lighting systems requiring a slim power distribution arrangement.

Shelf and Display Lighting

The movable pickup connector can provide flexibility when configuring compatible shelf and display lighting assemblies.

Adjustable Lighting Position

Where the connected lighting fixture and wiring arrangement permit, the sliding pickup point may allow lighting positions to be adjusted along the rail.

Lighting Control

Dimming, color temperature adjustment and smart control depend on the connected LED fixture, power supply and controller.

The conductive track itself should not be described as a DALI, DMX, Tuya or dimmable controller unless such functionality is confirmed for a specific system.

Installation

Recommended Installation Procedure

1. Confirm the rated voltage, maximum current and electrical compatibility of the complete track system.

2. Plan the required track length and the positions of power input and pickup connectors.

3. Disconnect the electrical supply before installation.

4. Cut the flexible rail only according to the manufacturer's approved cutting instructions.

5. Mount the track on a suitable surface using the recommended fixing method.

6. Install the power input connector at the designated connection point.

7. Connect the compatible power supply while observing the required polarity.

8. Insert or attach the sliding magnetic power pickup connector according to the system instructions.

9. Install the optional end cap where required.

10. Check electrical continuity, insulation and connector engagement before powering the connected lighting equipment.

11. Restore power and test the system under the intended operating load.

Installation Precautions

Use only a compatible power supply and matching track accessories.

Do not connect the conductive rail directly to AC mains unless the manufacturer explicitly specifies that the system is designed and certified for that purpose.

Do not exceed the rated current or power capacity of the rail and connectors.

Protect exposed conductors and cut ends according to the manufacturer's instructions.

Electrical installation should be performed by qualified personnel.

Technical Specifications

Technical Note: The final power supply, lighting load and connector configuration must be selected according to the manufacturer's confirmed electrical ratings.

Project Applications

Custom Cabinet Lighting

Furniture manufacturers can evaluate the flexible power track for cabinet lighting assemblies where a compact electrical distribution system is required.

The slim rail profile may help preserve usable cabinet space while supporting compatible lighting components.

Retail Display Shelving

Retail display fixtures frequently need discreet electrical connections for shelf lighting.

A flexible conductive track with movable pickup connectors can offer additional layout options during display fixture design.

Jewelry and Showcase Lighting

In jewelry showcases and display cabinets, compact lighting hardware is often preferred to maintain a clean presentation.

The system can be evaluated as part of a compatible low-voltage display lighting assembly.

Wardrobe and Furniture Lighting

Furniture manufacturers may use compact power distribution systems to simplify the electrical layout of compatible wardrobe or shelving lighting installations.

Exhibition and Commercial Displays

Temporary or modular exhibition fixtures may benefit from a power track system that supports project-specific layouts and component selection.

The final installation must be checked for electrical safety and mechanical reliability.

OEM/ODM

Flexible Magnetic Power Track Sourcing from USKYLED

USKYLED supplies cabinet lighting products, magnetic track lighting systems and related lighting accessories for international projects.

We welcome inquiries from:

• Cabinet lighting manufacturers

• Furniture manufacturers

• Retail display fixture suppliers

• Jewelry showcase manufacturers

• Lighting contractors

• Interior designers

• Lighting importers and distributors

            Customization and Project Support

For OEM/ODM projects, please contact USKYLED to discuss:

• Required track length

• Connector quantities

• Power input configuration

• Pickup connector requirements

• Cable and terminal options

• Mounting arrangements

• Packaging requirements

• Project quantity

• Technical drawings

• Sample availability

            Customization feasibility, minimum quantities and production schedules depend on the specific requirements.

Ordering Information

Minimum Order Quantity: 1 Piece

Sample Order Lead Time: 3–7 Days

Mass Order Lead Time: 7–15 Days

Available Components:

• Sliding Power Pickup Connector

• Power Input Connector

• Flexible Magnetic Conductive Rail

• Optional End Cap

           Lead times are estimates and subject to stock availability, order quantity and customization requirements.

Request a Quote for Flexible Magnetic Power Track Systems

Looking for an ultra-thin magnetic conductive rail for cabinet lighting, display shelving or custom furniture projects?

Contact USKYLED with your required track length, operating voltage, connector configuration and estimated order quantity.

Our team can help you review the available components, technical compatibility and purchasing options.

Website: https://www.uskyled.com

Contact USKYLED for product specifications, samples and wholesale quotations.