Rimless LED Aluminum Profile for Recessed Drywall Ceiling Lighting

H2 Product Introduction

The Rimless LED Aluminum Profile is designed for recessed linear lighting applications where the LED strip needs to be integrated into drywall, plasterboard, ceilings or walls.

Unlike surface-mounted aluminum channels, a trimless or rimless profile is designed to become part of the architectural surface. When properly installed and finished, the visible profile edge is minimized, creating a cleaner transition between the lighting channel and the surrounding ceiling or wall.

The USKYLED profile is manufactured with a die-cast aluminum body and is available with black or milky white covers. The current product page lists 0.5m and 1m profile lengths.

The product is suitable for projects requiring continuous linear illumination, decorative wall lighting, recessed ceiling lighting and concealed LED strip installations.

Important: This product is an aluminum profile/channel only. The LED strip light, transformer and end caps are not included in the listed configuration.

H3 Design

The rimless structure is designed to create a more integrated architectural appearance than conventional surface-mounted aluminum channels.

The profile can be incorporated into:

• Drywall ceilings
• Plasterboard ceilings
• Recessed walls
• Architectural wall details
• Decorative linear lighting
• Interior ceiling lines
• Modern architectural lighting systems

The current variants include:

• Unilateral-Milky B
• Unilateral-Black A
• Unilateral-Milky A
• Unilateral-Black B
• Flat Angle-Black A
• Flat Angle-Milky A
• Flat Angle-Black B
• Flat Angle-Milky B
• Internal-Black
• Internal-Milky
• External-Black
• External-Milky

These options indicate that the product family supports different installation geometries and cover appearances.

H3 Main Features

Rimless / Trimless Appearance

The recessed profile is intended to integrate into architectural surfaces, helping create a clean linear lighting appearance.

Die-Cast Aluminum Body

The product uses a die-cast aluminum body, providing a rigid channel structure for recessed LED strip installations.

Black and Milky White Covers

The product page specifies:

• Black
• Milky White

cover options.

Multiple Profile Configurations

Available configurations include unilateral, flat angle, internal and external versions, allowing the product to be selected according to different architectural installation requirements.

0.5m and 1m Lengths

The current product description specifies:

• 0.5m / approximately 20 inch
• 1m / approximately 40 inch

profile lengths.

LED Strip Compatible

The aluminum profile can be used as a mounting channel for a compatible LED strip light.

The LED strip itself is not included in the current product configuration.

Architectural Lighting Integration

The trimless profile is suitable for projects where the lighting channel needs to be incorporated into the ceiling or wall design rather than installed as a visible surface-mounted fixture.

H3 Application

The Rimless LED Aluminum Profile is suitable for a wide range of architectural and interior lighting applications.

Drywall Ceiling Lighting

The profile can be incorporated into drywall or plasterboard ceiling designs for linear illumination.

Recessed Wall Lighting

Suitable for decorative wall details where a concealed or integrated linear lighting effect is required.

Architectural Linear Lighting

The profile can be used as part of architectural linear lighting systems in residential and commercial interiors.

Cove Lighting

Suitable for indirect lighting layouts where the LED strip is integrated into a ceiling or wall detail.

Residential Interiors

Potential applications include:

• Living rooms
• Bedrooms
• Dining rooms
• Hallways
• Staircases
• Home theaters
• Feature walls

Commercial Interiors

Potential applications include:

• Hotels
• Restaurants
• Retail stores
• Offices
• Showrooms
• Reception areas
• Commercial corridors

H3 Size / Options

The current product page specifies two profile lengths:

Profile Configuration Options

H3 Lighting Options

Because this product is an aluminum LED profile rather than a complete LED fixture, the LED strip is selected separately.

The current page explicitly states that the LED strip light and transformer are not included.

Recommended Compatible Lighting Options

Depending on the project, the profile can be paired with suitable:

• Single-color LED strips
• COB LED strips
• CCT LED strips
• Dimmable LED strips
• High-density LED strips
• Low-voltage LED strips

The actual LED strip width and electrical specification should be checked against the selected profile before ordering.

H3 Installation

The profile is designed for recessed installation into suitable drywall, plasterboard or architectural surfaces.

Basic Installation Workflow

1. Determine the required lighting route.
2. Select the appropriate profile type.
3. Measure the required profile length.
4. Cut the aluminum profile if required.
5. Prepare the recessed opening.
6. Position the aluminum profile.
7. Secure the profile according to the installation method.
8. Complete the surrounding drywall/plaster finishing.
9. Install a compatible LED strip.
10. Connect the LED strip to the appropriate power supply.
11. Install the cover and required accessories.
12. Test the lighting system.

Installation Considerations

Before installation, confirm:

• LED strip width
• Profile dimensions
• Required recessed depth
• Power supply location
• LED strip voltage
• Thermal requirements
• Corner configuration
• Cover type
• End-cap requirements

The current product does not include the LED strip, transformer or end cap, so these components need to be sourced separately unless included in a customized project package.

H3 Technical Specifications

H3 Project Applications

Residential Projects

• Living room ceiling lighting
• Bedroom feature lighting
• Dining room linear lighting
• Staircase lighting
• Hallway lighting
• Feature wall lighting
• Home theater lighting

Hospitality Projects

• Hotel rooms
• Hotel corridors
• Restaurant interiors
• Reception areas
• Lobby lighting
• Architectural feature walls

Commercial Projects

• Offices
• Retail stores
• Showrooms
• Shopping spaces
• Commercial corridors
• Reception areas

Architectural Projects

The rimless profile is particularly relevant for:

• Minimalist interiors
• Modern architecture
• Custom drywall ceilings
• Architectural wall details
• Linear ceiling designs
• Concealed LED strip installations

H3 OEM/ODM

USKYLED can support OEM/ODM requirements for LED aluminum profile projects.

Potential customization areas include:

• Profile configuration
• Profile length
• Cover color
• Cover type
• Corner configuration
• Packaging
• Private labeling
• Project-specific accessories
• LED strip matching
• Custom profile development

For B2B projects, buyers can provide:

• Ceiling drawings
• Wall details
• Required profile length
• LED strip specification
• Required lighting effect
• Quantity
• Cover color
• Installation method

USKYLED can help confirm the appropriate profile configuration based on project requirements.

B2B Customer Applications

Suitable for:

• Lighting distributors
• LED strip suppliers
• Aluminum profile wholesalers
• Architectural lighting companies
• Lighting contractors
• Interior designers
• Ceiling contractors
• Electrical contractors
• Commercial lighting buyers
• Lighting brands
• Project procurement companies

CTA

Looking for a rimless LED aluminum profile for your next drywall or architectural lighting project?

USKYLED supplies recessed LED aluminum profiles for ceiling, wall and linear LED strip lighting applications.

Contact USKYLED for:

• Product samples
• Wholesale pricing
• Project quotations
• OEM/ODM
• Custom profile requirements
• Bulk orders
• LED strip matching
• Project-based sourcing

MOQ: 1 pcs

Sample Order Lead Time: 3–7 days

Mass Order Lead Time: 7–15 days

Contact USKYLED for your recessed linear lighting project.

click here to buy the LED strip :  https://www.uskyled.com/products/ra98-full-spectrum-led-strip-light-24v