Product Introduction
Recessed LED Step Light with PIR Motion Sensor for Indoor Stairways
The USKYLED Recessed LED Step Light is a compact architectural lighting fixture designed for stairways, corridors, hallways, bedrooms and other indoor areas where low-level guidance lighting is required.
With a 2W LED light source, the fixture combines motion detection and ambient light sensing to provide automatic illumination when people pass through a dark area. The light remains off when surrounding brightness is sufficient, helping reduce unnecessary operation.
The recessed design integrates the fixture into the wall for a clean architectural appearance. A tempered glass front panel gives the light a modern finish, while the one-piece panel design helps reduce exposed gaps and makes the surface easier to clean.
The product supports 110-240V input and is available with warm or neutral white light. White and gray housing options allow the fixture to coordinate with different interior wall finishes.
Design
The recessed LED step light features a minimalist wall-integrated design suitable for contemporary residential and commercial interiors.
The tempered glass panel provides a clean, premium appearance while protecting the lighting assembly. The one-piece panel design creates a relatively smooth front surface that is easy to maintain.
Available housing options include:
- White
- Gray
- Circular design
- Square design
The recessed configuration is designed to work with an 86 × 86 mm square mounting box, which can be specified separately according to project requirements.
Main Features
PIR + Ambient Light Sensing
The integrated sensing system combines motion detection with ambient light detection. During the daytime or when surrounding brightness is sufficient, the light remains off. When the environment becomes dark and movement is detected within the sensing range, the light turns on automatically.
Microwave Radar Sensor
The product page specifies a built-in 10.525G fixed-frequency microwave radar sensor, providing an additional sensing technology for automatic activation.
Automatic Shut-Off
After movement is no longer detected, the light automatically switches off after the configured delay period. The listed specification is approximately 30 seconds ±5 seconds.
Compact 2W LED Lighting
The 2W LED configuration provides low-power guidance lighting for stairs, corridors and other indoor circulation areas.
Tempered Glass Panel
The tempered glass front creates a modern architectural appearance and provides a durable surface for indoor wall installation.
Recessed Installation
The fixture is designed for embedded wall installation with an 86 × 86 mm square mounting box.
Long Service Life
The listed service life is up to 50,000 hours, making the fixture suitable for long-term residential and commercial lighting applications.
Application
The recessed LED step light is suitable for indoor applications where automatic low-level illumination and visual guidance are required.
Residential Applications
- Stairways
- Indoor steps
- Hallways
- Corridors
- Bedroom circulation areas
- Home entrances
- Interior passageways
Hospitality Applications
- Hotel corridors
- Hotel staircases
- Guest room circulation areas
- Apartment buildings
- Serviced apartments
Commercial Applications
- Office corridors
- Retail spaces
- Showrooms
- Restaurants
- Public interior areas
- Architectural projects
For projects requiring automatic night guidance, the PIR and light-sensing function can reduce the need for manual switching.
Size / Options
Product Type: LED Step Light
Power: 2W
Housing Colors:
Shape Options:
Color Temperature:
- Warm Light: 2700-3500K
- Neutral Light: 4000K
Mounting Box:
- 86 × 86 mm square mounting box
- Mounting box available as a project option
The product page currently offers lamp-only and lamp-with-box purchasing options.
Lighting Options
The fixture is available in warm and neutral white lighting configurations:
- 2700-3500K Warm White — suitable for residential bedrooms, hotel interiors and warm architectural environments.
- 4000K Neutral White — suitable for corridors, stairways, offices and modern commercial interiors.
The low-power 2W LED configuration is intended primarily for step guidance and ambient circulation lighting rather than high-output general illumination.
Installation
The fixture uses recessed wall installation.
Installation should be prepared around the specified 86 × 86 mm square mounting box. The mounting box can be ordered together with the light when required for a project.
Recommended installation workflow:
- Prepare the wall opening and mounting box.
- Complete the electrical wiring according to the project voltage requirements.
- Install the recessed mounting box.
- Connect the LED step light.
- Secure the fixture into the mounting position.
- Confirm PIR and ambient light sensor operation.
- Test automatic activation and shut-off.
Professional electrical installation is recommended for commercial and multi-unit projects.
Technical Specifications
| Specification |
Details |
| Product Type |
LED Step Light |
| Power |
2W |
| Input Voltage |
110-240V |
| Light Source |
LED |
| Color Temperature |
2700-3500K / 4000K |
| Material |
Tempered Glass + Metal Frame |
| Housing Color |
White / Gray |
| Sensor |
Motion Sensor + Light Sensor |
| Radar Sensor |
Built-in 10.525G Fixed-Frequency Microwave Radar |
| Induction Zone |
180° |
| Sensing Distance |
1-3 m |
| Delay Time |
30s ±5s |
| Installation |
Recessed / Embedded |
| Mounting Box |
86 × 86 mm Square |
| Service Life |
Up to 50,000 Hours |
| Application |
Indoor Stairways, Corridors, Hallways, Bedrooms and Hospitality Projects |
| MOQ |
1 pcs |
| Sample Lead Time |
3-7 days |
| Mass Order Lead Time |
7-15 days |
Project Applications
The product is suitable for lighting projects where compact wall-integrated step lighting and automatic sensing are required.
Typical project applications include:
Residential Projects
Private homes, apartments, villas and residential staircases.
Hotel & Hospitality Projects
Hotel stairways, corridors, guestroom access areas and serviced apartments.
Commercial Projects
Office buildings, retail stores, restaurants, showrooms and other commercial interiors.
Architectural Projects
Interior architectural projects requiring discreet step guidance lighting.
Property Development Projects
Multi-unit residential developments where standardized recessed stair lighting is required across multiple rooms or floors.
For larger projects, buyers can request specifications, samples, mounting boxes and customized configurations before mass production.
OEM/ODM
USKYLED supports OEM and ODM cooperation for distributors, lighting brands, contractors, wholesalers and project buyers.
Available cooperation options may include:
- Product branding
- Housing color customization
- Packaging customization
- Project-specific specifications
- Mounting box configuration
- Lighting color temperature selection
- Sample development
- Bulk production
- OEM/ODM packaging
MOQ: 1 pcs for sample or initial evaluation orders.
Sample Order Lead Time: 3-7 days
Mass Order Lead Time: 7-15 days
For project quantities, please contact USKYLED with the required quantity, target market, installation environment and preferred configuration so the production and delivery requirements can be confirmed.
