Product Introduction
The Motion Sensor RGB LED Stair Light Kit is a smart staircase lighting system designed to automate LED step lighting using motion detection and daylight sensing.
The system combines an RGB LED strip, smart controller, PIR sensors and a daylight sensor. When movement is detected, the staircase lighting can automatically activate, creating a practical and decorative lighting effect for residential and commercial staircases.
The product is designed with a main line for connecting the LED strips, helping simplify the wiring arrangement during installation. The controller also supports adjustment of lighting mode, brightness, delay time and speed, allowing users to configure the lighting behavior according to the staircase and project requirements.
The available full-set configurations range from 5-step to 25-step systems, making the product suitable for different staircase sizes.
Design
The system is designed as a coordinated staircase lighting kit rather than a single step lamp.
The main controller manages the LED lighting sequence while PIR sensors detect movement at the staircase. A daylight sensor helps determine whether lighting is required according to ambient conditions.
The RGB LED strips can create colorful staircase lighting effects while providing practical illumination for steps and stairways.
The controller housing uses ABS plastic, with a compact controller size of approximately L150 × W53 × H20 mm.
Main Features
- Motion sensor RGB LED stair lighting system
- 2 PIR motion sensors for movement detection
- 1 daylight sensor for ambient-light detection
- RGB LED strips for colorful staircase lighting
- 10–12W/m LED strip power
- Controller maximum output: 10A / 240W
- Adjustable lighting mode
- Adjustable brightness
- Adjustable delay time
- Adjustable lighting speed
- Main-line connection system designed to simplify LED strip installation
- Digital display and 4-button controller operation
- Flame-retardant ABS controller housing
- Support for 5 to 25 step full-set configurations
- Fixed or embedded PIR sensor installation
- Compact controller design
- MOQ: 1 pcs
Application
The Motion Sensor RGB LED Stair Light Kit can be used for a variety of staircase and step-lighting applications.
Residential Staircases
Suitable for homes, apartments, villas and duplex residences where automatic staircase lighting is required.
Hotel Staircases
The RGB lighting and automatic sensor function can be used in hotels, boutique accommodation and hospitality projects.
Villa Projects
The system can be integrated into premium residential staircase designs to combine functional step illumination with decorative lighting.
Indoor Stairways
Suitable for interior staircases where motion-activated lighting can reduce the need for manual switching.
Commercial Buildings
The system can be considered for selected commercial staircases, interior feature stairs and architectural lighting projects.
Smart Home Projects
The PIR-based activation and adjustable lighting behavior make the product suitable for smart-home-oriented staircase lighting applications.
Decorative Staircase Lighting
RGB illumination can be used when the staircase is also intended to function as an interior design feature.
Size / Options
The product is available in multiple full-set configurations:
- 5 Step Full Set
- 8 Step Full Set
- 10 Step Full Set
- 12 Step Full Set
- 14 Step Full Set
- 16 Step Full Set
- 18 Step Full Set
- 20 Step Full Set
- 25 Step Full Set
The controller dimensions are:
L150 × W53 × H20 mm
The LED strip length listed on the product page is:
1 meter
The LED strip power is:
10–12W/m
For projects with different staircase dimensions, the required configuration should be confirmed before ordering.
Lighting Options
The system uses RGB LED strips.
RGB lighting allows the staircase to be configured for colorful decorative effects rather than a single fixed white-light output.
Adjustable Lighting Functions
The controller supports adjustment of:
- Lighting mode
- Brightness
- Delay time
- Lighting speed
The product page also specifies a digital display and four-button control interface for operation.
Motion Detection
The system uses:
2 PIR sensors
The sensors can detect movement and trigger the staircase lighting.
The product description summarizes the operating concept as:
People come → lights turn on
People leave → lights turn off
This makes the system suitable for automatic staircase illumination where users do not want to operate a conventional wall switch.
Daylight Sensing
The kit includes:
1 daylight sensor
The daylight sensor can be used as part of the automatic lighting logic to reduce unnecessary operation when ambient light is sufficient.
Installation
The product uses a main-line connection system for the LED strips, designed to simplify the wiring arrangement.
The PIR sensors support:
- Fixed installation
- Embedded installation
The embedded sensor installation specification lists a 15mm diameter requirement.
Recommended Installation Process
- Confirm the number of staircase steps.
- Select the appropriate full-set configuration.
- Plan the LED strip positions for each step.
- Install the main connection line.
- Install the RGB LED strips.
- Install the PIR sensors.
- Install the daylight sensor.
- Mount the controller.
- Connect the power supply.
- Configure brightness, delay, speed and lighting mode.
- Test the motion detection sequence.
- Confirm the complete staircase lighting operation.
Electrical installation should follow applicable local requirements.
Technical Specifications
| Specification |
Details |
| Product Type |
Motion Sensor RGB LED Stair Light Kit |
| LED Type |
RGB LED Strip |
| LED Strip Length |
1 meter |
| LED Strip Power |
10–12W/m |
| Controller |
RGB Smart Controller |
| Controller Maximum Output |
10A / 240W |
| Motion Sensors |
2 PIR Sensors |
| Daylight Sensor |
1 |
| Controller Housing |
ABS Plastic |
| Controller Size |
L150 × W53 × H20 mm |
| Sensor Installation |
Fixed / Embedded |
| Embedded Sensor Diameter |
15 mm |
| Control |
Digital Display + 4 Buttons |
| Adjustable Functions |
Mode / Brightness / Delay / Speed |
| Step Options |
5 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 25 Steps |
| Lighting Color |
RGB |
| Installation |
Main-Line LED Strip Connection |
| Application |
Staircases / Step Lighting / Smart Home / Hotel |
| MOQ |
1 pcs |
| Sample Lead Time |
3–7 days |
| Mass Order Lead Time |
7–15 days |
| OEM/ODM |
Available upon project requirements |
The above specifications are based on the current product page.
Project Applications
The Motion Sensor RGB LED Stair Light Kit can be specified for:
- Residential staircase projects
- Villa staircase lighting
- Duplex home staircases
- Apartment stair lighting
- Hotel staircase projects
- Boutique hotel interiors
- Smart home projects
- Interior renovation projects
- Staircase manufacturers
- Interior design projects
- Architectural lighting projects
- Decorative RGB staircase projects
- Commercial interior stairways
- Hospitality renovation projects
- Custom staircase lighting systems
For project orders, buyers should provide the number of steps and preferred lighting configuration so the appropriate kit can be selected.
OEM/ODM
USKYLED can support OEM/ODM requirements for:
- Lighting brands
- Lighting distributors
- Smart home companies
- Staircase manufacturers
- Electrical contractors
- Interior design companies
- Architects
- Hotel project contractors
- Lighting project suppliers
Potential OEM/ODM requirements can include:
- LED strip configuration
- Controller configuration
- Step quantity
- Sensor configuration
- Lighting mode
- Brightness settings
- Housing design
- Packaging
- Product labeling
- Logo
- Project-specific wiring requirements
For customized staircase lighting projects, customers can provide staircase drawings, step quantity, installation dimensions and target lighting effects for evaluation.
B2B Ordering Information
MOQ: 1 pcs
The low MOQ is suitable for:
- Product testing
- Sample projects
- Showroom installation
- Smart home demonstrations
- Staircase design projects
- Small trial orders
- Wholesale evaluation
Sample Order Lead Time: 3–7 days
Suitable for product testing and staircase project evaluation.
Mass Order Lead Time: 7–15 days
Final lead time depends on order quantity, selected step configuration, product customization and production schedule.
For wholesale or project orders, buyers should provide:
- Number of steps
- Required quantity
- Lighting configuration
- Installation requirements
- Destination market
for quotation and technical confirmation.
CTA
Looking for a smart RGB stair lighting system with PIR motion sensors?
USKYLED supplies Motion Sensor RGB LED Stair Light Kits for residential, hospitality, smart-home and commercial staircase projects.
MOQ: 1 pcs
Sample Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days
Request a Sample or Wholesale Quote Today.
Send us your staircase step count and project requirements for product selection and quotation.
