H2 Product Introduction

The Motion Sensor LED Stair Light Strip is a modular staircase lighting solution designed to provide automatic illumination when people approach or move across the stairs. The system combines LED strip lighting, a central controller and dual PIR motion sensors to create a practical and visually clean lighting solution for modern staircases.

The system is available in different step configurations from 5 to 40 steps, allowing lighting contractors, distributors and project buyers to select a kit according to the staircase size.

The LED strip uses a COB LED design with 480 LEDs/m, providing continuous linear illumination along each step. The strip operates at DC24V, while the controller supports DC12V/DC24V configurations depending on the selected system.

H3 Design

The staircase lighting system uses a modular design that connects individual LED strips through a main cable and central controller.

A dedicated main wiring system helps simplify installation by connecting multiple step lights to the controller rather than requiring a separate complex wiring system for every step.

The LED strip has an approximately 8mm width and 2.2–2.5mm thickness, making it suitable for applications where a compact lighting profile is required.

H3 Main Features

Dual PIR Motion Sensors

Two PIR motion sensors can be installed at both ends of the staircase to detect movement and activate the lighting system.

Automatic Stair Lighting

The controller activates the stair lighting when motion is detected, helping provide illumination when the staircase is being used.

COB LED Strip

The LED strip uses COB technology with approximately 480 LEDs/m and a rated power of 10W/m for continuous linear illumination.

Flexible Step Configurations

The product page provides multiple kit options from 5 to 40 steps, allowing the system to be matched to different staircase sizes.

Adjustable Lighting Control

The controller supports functions including lighting delay, speed adjustment and dimming control.

Cuttable LED Strip

The LED strip can be cut at approximately 50mm intervals, allowing contractors to adapt the strip length to specific installation requirements.

Low-Voltage System

The system uses low-voltage DC operation, making it suitable for indoor architectural and residential staircase lighting applications.

H3 Application

The LED Stair Light Strip can be used for:

• Residential staircases
• Villas and private homes
• Apartments
• Hotels
• Restaurants
• Office buildings
• Commercial interiors
• Interior renovation projects
• Hospitality projects
• Architectural lighting projects
• Staircase remodeling
• Smart home lighting systems

The motion sensor function is particularly useful in stairways where automatic illumination is preferred over manually operated lighting.

H3 Size / Options

The system supports multiple staircase configurations.

Available Step Kits:

• 5 Step Kit
• 6 Step Kit
• 7 Step Kit
• 8 Step Kit
• 9 Step Kit
• 10 Step Kit
• 11 Step Kit
• 12 Step Kit
• 13 Step Kit
• 14 Step Kit
• 15 Step Kit
• 16 Step Kit
• 17 Step Kit
• 18 Step Kit
• 19 Step Kit
• 20 Step Kit
• 21 Step Kit
• 22 Step Kit
• 23 Step Kit
• 24 Step Kit
• 25 Step Kit
• 26 Step Kit
• 27 Step Kit
• 28 Step Kit
• 32 Step Kit
• 40 Step Kit

The product page also provides different LED color temperature options including 3000K, 4000K and 6000K.

H3 Lighting Options

Available lighting options include:

• 3000K Warm White
• 4000K Natural White
• 6000K Cool White

The COB LED strip is approximately 10W/m, with a brightness specification of around 1000–1100 lm/m.

The system can also support adjustable lighting behavior through the controller, including lighting speed, delay time and dimming functions.

H3 Installation

The LED stair light system is designed around a central controller, main cable, LED strips and two PIR motion sensors.

Typical installation steps include:

1. Measure each staircase step.
2. Select the appropriate step kit.
3. Install the LED strip on the designated position of each step.
4. Connect the LED strips to the main cable.
5. Connect the main cable to the controller.
6. Install the two PIR motion sensors.
7. Connect the appropriate DC power supply.
8. Test motion detection and lighting sequence.
9. Adjust lighting speed, delay and dimming settings as required.

The LED strip includes strong double-sided adhesive backing, which can simplify installation on suitable clean and dry surfaces.

H3 Technical Specifications

H3 Project Applications

For B2B lighting projects, the system can be specified for:

Residential Projects

• Villas
• Apartments
• Luxury homes
• Duplex houses
• Residential renovations

Hospitality Projects

• Hotels
• Resorts
• Restaurants
• Guest houses

Commercial Projects

• Offices
• Retail spaces
• Shopping areas
• Commercial buildings

Architectural Projects

• Interior design projects
• Staircase renovation
• Architectural lighting
• Smart home projects
• Custom staircase lighting

For larger projects, buyers can select different step quantities and lighting configurations according to the staircase layout.

H3 OEM/ODM

USKYLED can support OEM/ODM requirements for distributors, lighting brands, contractors and project buyers.

Customization can be discussed for:

• LED color temperature
• Step quantity
• LED strip length
• Controller configuration
• Motion sensor installation
• Cable length
• Packaging
• Product labeling
• Logo
• Project-specific configurations

For bulk projects, buyers should provide the staircase quantity, number of steps per staircase, step dimensions, preferred color temperature and required control functions so the appropriate configuration can be confirmed.

CTA

Looking for a motion sensor LED stair light system for your next project?

USKYLED supplies modular LED stair lighting solutions for residential, commercial and architectural applications.

MOQ: 1 pcs
Sample Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days

Contact USKYLED for wholesale pricing, project quotations, OEM/ODM requirements and custom staircase lighting solutions.

DM us for product details or request a project quotation.