LED In-Ground Light – IP68 Side-Emitting Fixture for Paths & Decks

Product Introduction

The USKYLED IP68 LED in-ground light provides compact, directional lighting for paths, decks and landscape details. Light exits through openings in the metal face, creating a side-emitting effect around the installation surface.

The range includes single-side and dual-side versions, with 1W and 3W options. Choose the output direction according to the edge, route or architectural detail being highlighted.

Current order options combine 3000K warm-white light with either DC12V or DC24V input. The lamp requires a compatible low-voltage DC power supply.

Design

A round stainless steel face gives the fitting a compact appearance within the surrounding surface. The shaped cover directs light through the selected side opening or openings.

Product photographs show recessed bodies, retention clips and installation sleeves. Confirm the mounting components supplied with the chosen model before preparing the installation.

The covered light-source arrangement is useful for marking nearby surfaces. Final brightness and distribution should be assessed in the intended mounting position.

Main Features

• Side-emitting design: Directs light across the surrounding surface.
• Single- or dual-side output: Select the distribution that suits the layout.
• Two power levels: 1W and 3W configurations.
• Three listed diameters: 42mm, 52mm and 62mm.
• Stainless steel construction: As specified in the product description.
• IP68 listed protection: Confirm the applicable immersion conditions for underwater use.
• DC12V or DC24V options: Match the power supply to the selected version.
• 3000K warm white: The current standard ordering option.
• 25cm lead cable: Listed cable length; connections require suitable waterproofing.

Application

Potential applications include:

• Garden path and walkway edges.
• Recessed deck marker lighting.
• Courtyard and landscape accents.
• Low-level architectural details.
• Step-side or adjacent wall lighting.
• Water-feature details, subject to confirmed installation conditions.

For ground or deck installations, confirm the mechanical load rating before placing the fitting where it may be stepped on or driven over.

For underwater projects, request the permitted depth, duration and water conditions before specifying the product.

Size / Options

Electrical options:

• DC12V, 3000K
• DC24V, 3000K

The listed diameter should not be used as the cutout dimension without checking the model drawing. Confirm the opening size, body depth and sleeve dimensions before drilling or casting the installation recess.

Lighting Options

Standard warm white

The current selector lists 3000K. The description gives a warm-white range of 2800–3200K.

Single-side output

Choose this version where light is required mainly on one side of the fitting. Align the opening with the intended surface or route during installation.

Dual-side output

Choose this version where two-sided illumination suits the layout. Check the actual outlet positions on the selected model.

Custom enquiries

The listing invites enquiries for 4000K, 6000K, red, yellow, blue, green and RGB versions, as well as DMX512 configurations.

These are enquiry-based options rather than standard selectable variants. Confirm the available model, wiring, controller requirements, MOQ and lead time before ordering.

Installation

1. Confirm the model, voltage and intended installation environment.
2. Obtain the cutout and installation-depth drawing.
3. Plan cable routes, accessible connection points and the power-supply location.
4. Prepare the recess and drainage arrangement required by the installation instructions.
5. Connect the lamp to the matching DC12V or DC24V supply.
6. Waterproof all connections using components suitable for the actual environment.
7. Align the light opening before securing the fitting.
8. Test the installation before completing the surrounding finish.

Do not connect this low-voltage lamp directly to mains electricity.

The listed lead cable is 25cm. Plan the joint location accordingly, and confirm the sealing method for buried or submerged connections. Electrical installation should be completed by a qualified installer.

Technical Specifications

Project Applications

For pathways, position the fittings around the edge detail and intended direction of light. Test a sample at night before fixing the spacing for a longer run.

For decks and courtyards, coordinate the recess, cable route and access for maintenance before the surface is completed. Confirm the fitting’s load suitability for its exact position.

For water-feature projects, review the complete installation specification, including immersion limits, cable joints and material suitability for the water conditions.

For repeat installations, record the model diameter, voltage, output direction and light colour on the order schedule.

OEM/ODM

For OEM/ODM enquiries, send USKYLED the required model, voltage, light colour, quantity and installation drawing.

The listing offers enquiries for alternative colours and control configurations. Confirm technical availability and any changes to wiring, accessories, pricing or delivery time.

Requests for longer leads, connectors, packaging or branding are subject to confirmation. Approve a sample before proceeding with a project order.

CTA

Need recessed lighting for paths, decks or landscape details? Contact USKYLED with your preferred diameter, output direction, voltage and quantity to request the model drawing, sample details and quotation.

MOQ: 1 piece | Sample lead time: 3–7 days | Bulk order lead time: 7–15 days