Mini Recessed LED Spotlight DC12V/DC24V Downlight for Cabinet & Indoor Lighting

H2 Product Introduction

The Mini Recessed LED Spotlight is a compact low-voltage lighting solution designed for applications where a small recessed fixture is required.

With a D28mm cutout, the spotlight can be integrated into cabinets, furniture, bookshelves, wine cabinets, showcases and indoor ceilings while maintaining a compact appearance. The product is available in 2W and 3W configurations with either DC12V or DC24V input, providing flexibility for different low-voltage lighting systems.

The spotlight supports PWM dimming, allowing the brightness to be adjusted when connected to a compatible PWM dimming system. The product page also specifies an aluminum body, IP42 protection, CRI >80, a rated lifetime of approximately 50,000 hours and a 5-year warranty.

The compact size and low-voltage design make this recessed LED spotlight suitable for furniture lighting, display lighting and indoor architectural accent lighting.

H3 Design

The spotlight uses a compact circular recessed structure designed for discreet integration into furniture and ceiling surfaces.

The listed body dimension is D32 × H32mm, with a D28mm cutout required for recessed installation. This small installation footprint makes the product suitable for applications where conventional downlights would be too large.

The aluminum lamp body provides a lightweight metal construction suitable for indoor lighting applications.

The compact design can be integrated into:

• Cabinets
• Bookshelves
• Wine cabinets
• Display furniture
• Ceilings
• Staircases
• Wall niches
• Commercial interiors

H3 Main Features

• Mini recessed LED spotlight
• DC12V or DC24V input
• 2W and 3W options
• PWM dimming support
• Compact D28mm cutout
• D32 × H32mm lamp body
• Aluminum housing
• 30° / 60° beam angle options
• Warm white, neutral white and cool white
• CRI >80Ra
• IP42 protection
• Approx. 50,000-hour lifetime
• 5-year warranty
• CE and RoHS certified
• 170mm Teflon cable
• Low-voltage operation
• Suitable for cabinet and indoor lighting
• MOQ: 1pcs
• Sample order lead time: 3–7 days
• Mass order lead time: 7–15 days

The product page specifies PWM dimming, DC12V/DC24V input, aluminum construction, 170mm Teflon cable, IP42, CRI >80, 30°/60° beam angles, 50,000-hour lifetime and 5-year warranty.

H3 Application

The Mini Recessed LED Spotlight is designed for compact indoor lighting applications.

Cabinet Lighting

The small recessed structure makes it suitable for cabinets where a discreet light source is required.

Display Cabinet Lighting

The focused beam can be used to illuminate products, collectibles and decorative objects inside display cabinets.

Bookcase Lighting

The compact fixture can be integrated into shelves and bookcases for localized accent lighting.

Wine Cabinet Lighting

The low-voltage spotlight can illuminate wine bottles and display areas inside furniture.

Furniture Lighting

Furniture manufacturers can integrate the spotlight into custom cabinets, shelving systems and display furniture.

Residential Lighting

The fixture can also be used for:

• Bedrooms
• Kitchens
• Living rooms
• Hallways
• Staircases
• Entrance areas

Commercial Lighting

Potential commercial applications include:

• Restaurants
• Bars
• KTV interiors
• Retail displays
• Hotel interiors
• Exhibition areas

These application types are consistent with the product page's listed applications, which include ceiling, bedroom, kitchen, living room, showcase, cabinet, bookcase, wine cabinet, staircase, entrance, hallway, bar, KTV and restaurant lighting.

H3 Size / Options

The product currently provides the following electrical options:

The product page lists these four wattage/voltage combinations.

H3 Lighting Options

Three main white-light color ranges are available:

The current product selector displays 3000K, 4000K and 6000K choices, while the technical description gives the broader corresponding ranges above.

The product also provides:

• 30° beam angle
• 60° beam angle

These options allow buyers to select a narrower or broader light distribution depending on the application.

H3 Installation

The product is designed for recessed installation.

The required cutout is D28mm, while the fixture body measures approximately D32 × H32mm.

Basic installation process:

1. Prepare a D28mm cutout.
2. Route the DC12V or DC24V power cable.
3. Connect the spotlight to the appropriate low-voltage power supply.
4. Insert the fixture into the prepared opening.
5. Check the lighting direction and beam coverage.
6. If dimming is required, connect the fixture to a compatible PWM dimming system.

Because the product uses DC12V/DC24V input, the correct low-voltage power supply must be selected according to the required wattage and quantity. The original page also specifically reminds users to choose the appropriate power supply.

H3 Technical Specifications

H3 Project Applications

The Mini Recessed LED Spotlight can be used in a range of residential and commercial lighting projects.

Residential Projects

• Kitchen cabinets
• Wine cabinets
• Living rooms
• Bedrooms
• Hallways
• Staircases
• Entrance areas
• Built-in furniture

Furniture Projects

• Custom cabinets
• Bookcases
• Display furniture
• Shelving systems
• Interior furniture

Retail Projects

• Product display cabinets
• Retail showcases
• Merchandise displays
• Boutique interiors
• Jewelry displays

Hospitality Projects

• Hotel rooms
• Restaurants
• Bars
• KTV interiors
• Reception areas

For B2B projects, the DC12V/DC24V configuration allows the spotlight to be integrated into existing low-voltage lighting systems.

H3 OEM/ODM

USKYLED can support lighting distributors, furniture manufacturers, cabinet manufacturers, display fixture companies and project contractors with OEM/ODM requirements.

Potential customization and project discussions may include:

• DC12V or DC24V configuration
• 2W / 3W power selection
• Beam angle
• Color temperature
• Cable length
• Housing finish
• Packaging
• Private-label packaging
• Project quantities
• Furniture integration requirements

For OEM/ODM projects, buyers can provide the required voltage, wattage, CCT, beam angle, installation dimensions and project quantity for evaluation.

CTA

Looking for compact low-voltage recessed LED spotlights for cabinets, furniture or indoor lighting projects?

Contact USKYLED for samples, specifications and wholesale quotations.

MOQ: 1pcs
Sample order lead time: 3–7 days
Mass order lead time: 7–15 days

Available configurations include:

• 2W / 3W
• DC12V / DC24V
• PWM dimming
• 30° / 60° beam angle
• 2700–3000K / 4000–4500K / 5500–6500K
• D28mm cutout
• Aluminum housing
• IP42
• 5-year warranty

Contact USKYLED for samples, bulk orders and customized lighting projects.