Product Introduction
The USKYLED Bendable LED Aluminum Profile is designed for LED strip lighting installations that require curved, flexible or non-linear lighting layouts.
Unlike a conventional rigid aluminum LED channel, this profile is intended for applications where the lighting path may need to follow a curved architectural surface. Its recessed installation format allows the profile to be integrated into ceilings, floors, walls and other interior surfaces.
The product combines an aluminum profile body with a milky white silicone diffuser, creating a clean channel for compatible LED strip lighting. The current product page specifies a 100cm / 40-inch length and multiple profile dimensions, including 10×10mm, 15×10mm, 20×10mm, 30×10mm, 30×20mm and 50×10mm.
The product range also includes different configurations identified as U-Style, YW-Style, Unilateral and Bilateral, providing options for different lighting layouts and installation requirements.
The LED strip light and end caps are not included with the profile, allowing project buyers to select a compatible LED strip according to their required voltage, power, color temperature, CRI and control system.
Design
The profile is designed around a flexible architectural lighting concept rather than a conventional straight LED channel.
Its bendable construction allows the lighting channel to follow curved design elements and non-linear paths.
The aluminum body provides the structural channel, while the milky white silicone diffuser covers the LED strip and provides a clean finished appearance.
Available configurations include:
- U-style profile
- YW-style profile
- Unilateral profile
- Bilateral profile
- Recessed installation
- Curved lighting layouts
- Linear and non-linear lighting paths
The different profile dimensions allow lighting designers to match the channel to different LED strip widths and architectural details.
Main Features
Bendable Profile Design
The profile is designed for curved and flexible lighting layouts where a conventional rigid aluminum channel may not provide the required shape.
Recessed Installation
The product is specified for recessed installation, allowing the profile to be integrated into ceilings, floors, walls and other architectural surfaces.
Aluminum + Silicone Construction
The product uses an aluminum profile body with a milky white silicone diffuser.
Multiple Profile Sizes
The product page lists:
- 10 × 10mm
- 15 × 10mm
- 20 × 10mm
- 30 × 10mm
- 30 × 20mm
- 50 × 10mm
This provides options for different LED strip widths and installation details.
100cm Standard Length
The listed standard profile length is 100cm / 40 inches.
Multiple Structural Configurations
The available variants include U-1010, U-1510, U-2010, U-3010, U-3020, U-5010, YW-1010, YW-1510, YW-2010, YW-3010, YW-3020, YW-5010, Unilateral-1313 and Bilateral-1313.
Compatible with LED Strip Lighting
The channel is designed to accommodate compatible LED strip lights. The LED strip itself is not included.
Application
The Bendable LED Aluminum Profile is suitable for architectural and decorative lighting where a curved or recessed LED lighting line is required.
Curved Ceiling Lighting
The flexible channel can follow curved ceiling details to create continuous architectural illumination.
Recessed Floor Lighting
It can be integrated into suitable floor details for decorative or accent lighting.
Wall Lighting
The profile can be used to create curved wall lighting or recessed decorative lines.
Architectural Linear Lighting
Designers can incorporate the profile into custom linear lighting concepts where the lighting path is not completely straight.
Interior Decorative Lighting
Suitable for residential and commercial interior projects requiring concealed or integrated LED strip lighting.
Retail and Hospitality
The profile can be considered for retail stores, hotels, restaurants, showrooms and other spaces requiring customized linear lighting.
Size / Options
| Profile Option |
Size |
| U-1010 |
10 × 10mm |
| U-1510 |
15 × 10mm |
| U-2010 |
20 × 10mm |
| U-3010 |
30 × 10mm |
| U-3020 |
30 × 20mm |
| U-5010 |
50 × 10mm |
| YW-1010 |
10 × 10mm |
| YW-1510 |
15 × 10mm |
| YW-2010 |
20 × 10mm |
| YW-3010 |
30 × 10mm |
| YW-3020 |
30 × 20mm |
| YW-5010 |
50 × 10mm |
| Unilateral-1313 |
13 × 13mm |
| Bilateral-1313 |
13 × 13mm |
| Standard Length |
100cm / 40in |
| Body Color |
Silver |
| Diffuser |
Milky White Silicone |
Lighting Options
The profile is intended for use with compatible LED strip lighting.
Because the current product page states that the LED strip light is not included, the lighting source can be selected separately according to the project specification.
Potential lighting configurations may include:
- Single-color LED strips
- COB LED strips
- CCT LED strips
- High-CRI LED strips
- Dimmable LED strips
- RGB LED strips
- RGBW LED strips
- Smart LED strips
- Architectural linear LED strips
The final LED strip width should be matched with the selected profile size.
For example, smaller profiles such as 10×10mm are better suited to narrow LED strip applications, while larger profiles can accommodate wider lighting configurations where compatible.
Exact voltage, wattage, CCT, CRI and control specifications should be confirmed based on the selected LED strip.
Installation
The product is specified for recessed installation.
A typical project installation can follow these steps:
- Determine the required curved lighting path.
- Select the appropriate U, YW, unilateral or bilateral profile.
- Select the profile size according to the LED strip width.
- Prepare the recessed mounting channel.
- Shape and position the bendable aluminum profile along the required path.
- Secure the profile within the recessed opening.
- Install the compatible LED strip.
- Install the silicone diffuser.
- Fit end caps if required.
- Connect the LED strip to the appropriate power supply and control system.
- Test the lighting before completing the architectural finish.
Installation details may vary according to the substrate, profile configuration and project design.
Technical Specifications
| Specification |
Details |
| Product Type |
Bendable LED Aluminum Profile |
| Main Keyword |
Bendable LED Aluminum Profile |
| Material |
Aluminum + Silicone |
| Body Color |
Silver |
| Diffuser Color |
Milky White |
| Installation |
Recessed |
| Standard Length |
100cm / 40in |
| Profile Sizes |
10×10 / 15×10 / 20×10 / 30×10 / 30×20 / 50×10mm |
| Configurations |
U-Style / YW-Style / Unilateral / Bilateral |
| LED Strip |
Not Included |
| End Cap |
Not Included |
| Application |
Curved & Recessed Linear Lighting |
| MOQ |
1 pcs |
| Sample Lead Time |
3–7 Days |
| Mass Order Lead Time |
7–15 Days |
| OEM/ODM |
Available on Request |
Project Applications
The Bendable LED Aluminum Profile can be used for:
- Curved ceiling lighting
- Recessed ceiling lighting
- Curved wall lighting
- Floor accent lighting
- Architectural linear lighting
- Decorative interior lighting
- Indirect lighting
- Feature wall lighting
- Retail lighting
- Hotel lighting
- Restaurant lighting
- Showroom lighting
- Exhibition lighting
- Residential interiors
- Commercial interiors
- Custom architectural lighting
For large projects, multiple profile sections can be incorporated into continuous curved lighting layouts according to the architectural design.
OEM/ODM
USKYLED supports OEM/ODM cooperation for aluminum LED profiles and architectural linear lighting solutions.
Customization can be discussed for:
- Profile dimensions
- Profile structure
- U/YW profile configuration
- Unilateral or bilateral lighting configuration
- Aluminum finish
- Silicone diffuser
- Profile length
- LED strip compatibility
- Packaging
- Private labeling
- Project-specific accessories
For lighting distributors, wholesalers, architects, contractors and project buyers, USKYLED can develop profile configurations according to project requirements.
OEM/ODM production time should be confirmed according to the final specifications and order quantity.
CTA
Looking for a bendable LED aluminum profile for a curved lighting project?
Contact USKYLED for profile options, samples, bulk pricing and customized architectural lighting solutions.
MOQ: 1 pcs
Sample Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days
Send us your required profile size, lighting layout, LED strip specification and project quantity to receive a suitable profile recommendation and quotation.
