Anti-Glare Silicone LED Neon Tube Cover for 12mm LED Strips

Product Introduction

The USKYLED T1610/T2010 Anti-Glare Silicone LED Neon Tube Cover is a flexible protective and light-diffusing tube designed for 12mm SMD LED strips.

The product combines a flexible silicone structure with a distinctive honeycomb-patterned surface. According to the current product specification, the honeycomb surface is designed to provide an anti-glare effect while maintaining a clean and consistent linear lighting appearance.

The tube is compatible with lighting tape operating at 5V, 12V and 24V, while the current product specification identifies the compatible PCB width as 12mm.

It is available in two configurations:

• T1610 Anti-Glare
• T2010 Anti-Glare

The current page displays a 5m length selection, while the package description states a tube length range of 0.5m–5m according to the selected configuration.

Design

The T1610/T2010 tube uses a soft silicone construction that can be bent and shaped for different linear lighting layouts.

Its main visual feature is the honeycomb-patterned outer surface.

This structure gives the product a distinctive appearance while supporting the specified anti-glare function.

Design Characteristics

• Flexible silicone body
• Honeycomb-patterned surface
• Anti-glare structure
• Bend-resistant construction
• High tensile strength
• Suitable for curved and straight layouts
• Designed around 12mm SMD LED strips

The product is particularly suitable where the lighting design requires a more controlled visual surface rather than an exposed LED strip.

Main Features

Honeycomb Anti-Glare Surface

The honeycomb surface is the defining feature of this product and is designed to reduce direct glare while providing a distinctive diffuser appearance.

IP67 Waterproof Protection

The tube is specified as IP67 waterproof, making it suitable for appropriately designed indoor and outdoor lighting installations.

Flexible Silicone Construction

The silicone material provides flexibility and allows the tube to be shaped for different linear lighting designs.

Bend-Resistant

The product specification highlights its bend-resistant construction and high tensile strength.

Heat Resistant

The product is made from silicone and is described as heat-resistant for demanding lighting environments.

Uniform Lighting Appearance

The product uses a structural design intended to provide high light efficiency, consistent color temperature and a reduced visible-spot effect when paired with a suitable LED strip.

Outdoor-Compatible Construction

The silicone structure and IP67 rating support use in appropriately designed outdoor lighting environments.

Application

The T1610/T2010 silicone LED neon tube cover is designed for 12mm SMD LED strips and can be used with compatible 2835, 3535, 5050 and WS2812 LED strip configurations referenced on the product page.

Typical Applications

• Architectural linear lighting
• Decorative linear lighting
• LED signage
• Retail displays
• Commercial interiors
• Furniture lighting
• Cabinet lighting
• Ceiling details
• Wall details
• Recessed lighting
• Exhibition lighting
• Hospitality projects
• Outdoor decorative lighting

LED Strip Compatibility

Suitable applications include compatible:

• 2835 LED strips
• 3535 LED strips
• 5050 LED strips
• WS2812 LED strips

The exact LED strip and electrical configuration should be matched to the tube and project requirements.

Size / Options

Model Options

Compatible PCB Width

12mm SMD LED Strip

Length

The current product page displays:

5m

The package description states:

0.5m–5m according to the selected configuration

For custom or project quantities, final available lengths should be confirmed with USKYLED.

Lighting Options

This product is a silicone tube / cover, not a complete LED strip light.

The current product page explicitly states that the LED strip is not included and that the power supply is determined by the selected LED strip.

Compatible Working Voltage

• 5V
• 12V
• 24V

Compatible LED Strip Types

• 2835
• 3535
• 5050
• WS2812

Lighting System Configuration

The final lighting characteristics depend on the LED strip installed inside the tube, including:

• LED color
• CCT
• RGB/RGBW configuration
• LED density
• Power consumption
• Brightness
• Addressable control

This separation should remain clear on the product page to avoid customers assuming the tube itself contains LEDs.

Installation

The T1610/T2010 tube is designed to work with compatible 12mm LED strips and includes basic installation accessories.

Package Includes

• 1 × LED Neon Tube, according to selected length
• 1 pair × End Caps
• 3 × Buckles per meter

The current page specifies these accessories in the package.

Recommended Installation Process

1. Select a compatible 12mm LED strip.
2. Confirm the LED strip voltage.
3. Insert the LED strip into the silicone tube.
4. Position the tube according to the lighting layout.
5. Secure the tube using the supplied buckles.
6. Install the end caps where required.
7. Connect the LED strip to the correct power supply.
8. Test the complete lighting system before final installation.

Installation Type

Flexible / Linear Installation

Fixing Accessories

Buckles + End Caps

Technical Specifications

Project Applications

Architectural Lighting

The anti-glare honeycomb surface makes the tube suitable for architectural linear lighting where the visible light source needs a more controlled appearance.

Retail Lighting

Potential uses include:

• Display shelves
• Product displays
• Brand counters
• Store fixtures
• Decorative retail structures

Commercial Interiors

Suitable for:

• Offices
• Restaurants
• Hotels
• Reception areas
• Commercial decorative lighting

Furniture Lighting

The flexible tube can be integrated into:

• Cabinets
• Shelving
• Wardrobes
• Furniture structures
• Decorative edges

LED Signage

Compatible LED strips can be installed inside the tube for custom illuminated signage and decorative lettering.

Outdoor Linear Lighting

With an IP67-rated silicone structure, the product can be considered for appropriately designed outdoor applications where the LED strip, connectors and power supply are also correctly protected.

OEM/ODM

USKYLED supports B2B sourcing for silicone LED neon tubes, LED strip accessories and flexible linear lighting components.

Suitable B2B Buyers

• LED lighting distributors
• LED strip manufacturers
• LED neon manufacturers
• Signage companies
• Lighting wholesalers
• Architectural lighting suppliers
• Lighting contractors
• Interior lighting companies
• Commercial project suppliers
• LED lighting accessory distributors

OEM/ODM Discussion Points

For project orders, buyers can discuss:

• T1610 or T2010 model
• Tube length
• Packaging
• Branding
• LED strip compatibility
• Installation accessories
• Project-specific requirements

Order Information

MOQ: 1pcs

Sample Order Lead Time: 3–7 days

Mass Order Lead Time: 7–15 days

OEM/ODM: Available

Final production timing should be confirmed according to order quantity and customization requirements.

CTA

Request a Sample or Wholesale Quote

Looking for an anti-glare silicone LED neon tube cover for a 12mm LED strip?

Send USKYLED your:

LED Strip Type + PCB Width + Tube Model + Length + Quantity + Application

Our team can help confirm the suitable T1610 or T2010 configuration for your linear lighting project.

MOQ: 1pcs

Sample Lead Time: 3–7 days

Mass Order Lead Time: 7–15 days

DM us / Contact USKYLED for Wholesale, Project Orders & OEM/ODM