3W IP68 In-Ground LED Light for Garden & Landscape Lighting

Product Introduction

The USKYLED 3W IP68 In-Ground LED Light is a low-voltage outdoor lighting fixture designed for recessed ground installation in gardens, pathways, terraces, decks, driveways and landscape projects.

The fixture uses a 304 stainless steel body and an IP68 protection rating for outdoor environments exposed to moisture, rain and water. Its compact design allows the light to be integrated into paving, landscape structures and outdoor architectural areas without creating a visually bulky fixture.

With DC12V input, the light is suitable for low-voltage outdoor lighting systems. RGB, RGBW and single-color options are available for both functional illumination and decorative landscape lighting. The product also supports PWM dimming for projects requiring adjustable light output.

Design

The in-ground design allows the fixture to be recessed into outdoor surfaces for a clean and integrated appearance.

The stainless steel housing provides a durable finish for landscape environments, while the compact format allows designers to create continuous lighting effects along pathways, terraces, driveways and garden areas.

Multiple round, square and half-moon configurations are available to accommodate different installation layouts and lighting requirements. The current product selector includes D42mm, D52mm, D62mm, L45mm, L55mm and L65mm configurations, as well as different hole arrangements.

Main Features

• IP68 waterproof protection for demanding outdoor environments
• 304 stainless steel housing for outdoor use
• DC12V low-voltage input
• 3W LED power
• PWM dimming support
• 45° beam angle
• RGB and RGBW lighting options
• 3000K, 4000K and 6000K single-color options
• 50cm silicone cable, extendable up to 10m
• Up to 50,000 hours lifetime
• 5-year warranty
• CE and RoHS listed on the technical specification
• PC embedded parts included

These specifications are based on the current product page.

Application

The IP68 in-ground LED light is suitable for a wide range of outdoor lighting applications, including:

• Garden pathways
• Landscape gardens
• Terraces
• Patios
• Outdoor decks
• Driveways
• Steps
• Porches
• Villas
• Parks
• Lawns
• Squares
• Streets
• Fountains
• Waterfalls
• Architectural landscape areas

The product page specifically lists gardens, streets, squares, villas, parks, lawns, terraces, fountains, waterfalls, decks, paths, roads, steps, porches and driveways as applications.

Size / Options

The product is offered in multiple fixture configurations to accommodate different project layouts.

Round Options

• D42mm Round
• D52mm Round
• D62mm Round

Square Options

• L45mm Square
• L55mm Square
• L65mm Square

Hole Configurations

• D42mm 1 Hole
• D42mm 2 Hole
• D42mm 4 Hole
• D52mm 1 Hole
• D52mm 2 Hole
• D52mm 4 Hole
• D62mm 1 Hole
• D62mm 2 Hole
• D62mm 4 Hole

Half-Moon Options

• D42mm Half Moon
• D52mm Half Moon
• D62mm Half Moon

These options are currently displayed in the product selector.

Lighting Options

The current page provides several lighting choices:

• 3000K warm white
• 4000K neutral white
• 6000K cool white
• RGB
• RGBW 3000K
• RGBW 6000K

The RGB and RGBW versions can be used for decorative landscape lighting, fountain lighting and architectural outdoor projects where dynamic or colored lighting effects are required.

Important: RGB and RGBW versions require additional RGB/RGBW dimming or control equipment. The LED power supply is also not included with the standard product and needs to be purchased separately.

Installation

The product is designed for recessed in-ground installation.

A typical installation process includes:

1. Prepare the required installation opening.
2. Install the PC embedded component.
3. Position the in-ground LED fixture.
4. Connect the fixture to a suitable DC12V power supply.
5. Connect the RGB/RGBW controller or dimmer when applicable.
6. Test the lighting system before finalizing the installation.

The product includes one underground light and one PC embedded part. The standard product does not include the LED power supply.

For professional landscape projects, the installer should confirm drainage, cable routing, power supply capacity and installation depth before installation.

Technical Specifications

Project Applications

Residential Landscape Projects

Suitable for:

• Private gardens
• Villas
• Terraces
• Driveways
• Outdoor steps
• Patios
• Residential pathways

Commercial Landscape Projects

Suitable for:

• Hotels
• Resorts
• Restaurants
• Commercial courtyards
• Shopping areas
• Public landscapes
• Parks
• Outdoor pedestrian areas

Water Feature Projects

The IP68 construction and low-voltage DC12V design make the product suitable for selected fountain and water-feature applications, subject to proper installation and system design.

RGB and RGBW versions can be used where decorative color-changing effects are required.

Architectural Landscape Lighting

The compact recessed format can be integrated into:

• Building entrances
• Outdoor walls and paving
• Landscape structures
• Architectural pathways
• Courtyards
• Driveways

OEM/ODM

USKYLED can support OEM/ODM requirements for outdoor and landscape lighting projects.

Available customization can be discussed according to project requirements, including:

• Lighting color
• RGB / RGBW configuration
• Fixture size
• Cable length
• Housing configuration
• Dimming/control requirements
• Packaging
• Product labeling
• Project-specific specifications

For larger landscape projects, distributors, lighting contractors and project suppliers can contact USKYLED for configuration recommendations, sample evaluation and bulk quotation.

CTA

Looking for an IP68 in-ground LED light for your landscape lighting project?

Contact USKYLED for product specifications, samples, OEM/ODM options and bulk pricing.

MOQ: 1 pcs
Sample Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days

Request a Quote → Contact USKYLED