Product Introduction
The USKYLED 24V Motion Sensor Stair LED Strip Light Kit is an intelligent lighting solution designed for indoor staircases, residential corridors and architectural step lighting projects.
Combining high-density COB LED strips, dual motion sensors and an integrated stair lighting controller, the system automatically activates when movement is detected. Its dynamic water flow lighting effect creates a smooth, progressive illumination sequence along the installed strip.
Unlike conventional staircase lights that require manual switching, this motion-activated LED lighting system offers convenient hands-free operation. It is particularly suitable for modern homes, villas, duplex apartments, hotels and interior renovation projects.
Available in 5m, 10m and 15m kits, the system provides flexible options for different staircase layouts and lighting requirements.
Design
Integrated 2-in-1 Controller and Power Supply
The staircase lighting system features a compact controller that combines a 24V DC power supply and intelligent lighting control functions in one housing.
This integrated design reduces the number of separate components required during installation and helps simplify wiring.
The controller measures 223 × 60 × 27mm and supports a maximum rated output of 400W.
Two motion sensors are designed for placement at opposite ends of the staircase, allowing the system to respond to people approaching from either direction.
High-Density COB LED Strip
The supplied LED strip uses COB technology with 360 LED chips per meter.
Its closely spaced LED chips help create a continuous line of illumination, making it suitable for discreet installation beneath stair nosings, along step edges or inside compatible aluminum profiles.
The 10mm-wide PCB offers flexibility for installation in narrow architectural lighting channels.
Main Features
1. Automatic Motion Sensor Activation
The lighting system activates automatically when movement is detected, eliminating the need for a conventional wall switch during normal operation.
2. Dynamic Water Flow Lighting Effect
The compatible SPI COB LED strip and intelligent controller produce progressive lighting effects that add visual interest to modern staircases.
3. Dual-Sensor Staircase Control
Two sensors can be positioned at the upper and lower ends of the staircase for convenient activation from either direction.
4. Adjustable Lighting Speed and Brightness
The controller allows users to adjust the animation speed and brightness to suit different environments and preferences.
5. Adjustable Automatic Switch-Off Delay
Available delay settings include 2, 10, 20, 40, 60 and 80 seconds.
6. Integrated 24V Power Supply
The controller combines the power supply and lighting control system in one unit, simplifying component selection.
7. Multiple Strip Lengths
Choose from 5m, 10m and 15m kits according to the staircase dimensions and installation requirements.
8. Three White Light Options
Available color temperatures include 3000K warm white, 4000K natural white and 6000K cool white.
9. High-Density COB Lighting
With 360 LED chips per meter, the strip provides closely spaced light emission for architectural accent lighting.
10. Project-Friendly Configuration
Adjustable pixel settings, lighting speed and delay timing allow installers to configure the system for different layouts.
Application
Residential Staircases
Create automatic staircase lighting for villas, duplex apartments, townhouses and modern residential interiors.
Interior Corridors
Provide motion-activated accent lighting along compatible corridor edges and architectural details.
Hotel Staircases
Add decorative lighting effects to suitable indoor hotel staircase installations.
Luxury Homes and Smart Interior Projects
Integrate automatic lighting effects into contemporary interior design schemes without requiring manual switching for everyday use.
Architectural Step Lighting
Install the COB LED strip beneath suitable stair nosings or within compatible recessed profiles to create a discreet linear lighting effect.
Size / Options
The USKYLED Motion Sensor Stair LED Strip Light Kit is available in three standard lengths:
| Kit Option |
LED Strip Length |
Operating Voltage |
| 5M Full Kit |
5 meters |
DC 24V |
| 10M Full Kit |
10 meters |
DC 24V |
| 15M Full Kit |
15 meters |
DC 24V |
Color Temperature Options
-
Warm White: 3000K
-
Natural White: 4000K
-
Cool White: 6000K
Controller Dimensions: 223 × 60 × 27mm
LED Strip PCB Width: 10mm
For special project requirements, please contact USKYLED to discuss suitable configurations and customization options.
Lighting Options
3000K Warm White
A warm, comfortable lighting tone suited to residential staircases, bedrooms, villas and hospitality interiors.
4000K Natural White
A balanced white light suitable for modern homes, corridors and contemporary commercial interiors.
6000K Cool White
A crisp white appearance for projects requiring a brighter, cooler visual atmosphere.
Dynamic Lighting Control
The integrated controller supports adjustable brightness, animation speed, pixel configuration and automatic switch-off delay.
These settings allow installers to adapt the lighting sequence to the installed strip and project requirements.
Installation
Step 1: Plan the Lighting Layout
Measure the required installation length and select the appropriate 5m, 10m or 15m kit.
Identify suitable positions for the LED strip, controller and motion sensors.
Step 2: Install the LED Strip
Mount the COB LED strip in a suitable location beneath the stair nosing, along a step edge or within a compatible aluminum profile.
Ensure that the mounting surface is clean, dry and appropriate for the selected installation method.
Step 3: Position the Motion Sensors
Install Sensor A near the upper staircase entrance and Sensor B near the lower entrance, following the supplied wiring diagram.
Step 4: Connect the Controller
Connect the 24V SPI COB LED strip to the controller using the verified terminal assignments and manufacturer's wiring instructions.
The product documentation identifies the following strip wires:
Do not rely on wire color alone when connecting the system.
Step 5: Connect the AC Power Supply
The integrated controller is specified for 175–265V AC input. It is not suitable for direct connection to a 110V AC supply.
AC mains wiring must be completed by a qualified installer in accordance with local electrical regulations.
Step 6: Configure the Controller
Set the appropriate pixel number, strip order, brightness, animation speed and automatic switch-off delay.
Follow the user manual before testing. Incorrect pixel settings may cause only part of the LED strip to illuminate.
Step 7: Test the System
Test motion activation from both staircase entrances and verify the lighting sequence and automatic switch-off behavior before completing the installation.
Technical Specifications
| Parameter |
Specification |
| Product Type |
Motion Sensor Stair LED Strip Light Kit |
| Brand |
USKYLED |
| Product Reference |
1005007206129466 |
| LED Technology |
SPI COB LED Strip |
| LED Strip Voltage |
DC 24V |
| Controller Input Voltage |
AC 175–265V |
| Controller Output Voltage |
DC 24V |
| Maximum Controller Power |
400W |
| LED Strip Power |
11.52W/m |
| LED Density |
360 LEDs/m |
| LED Chip |
SANAN COB |
| PCB Width |
10mm |
| Standard Lengths |
5m / 10m / 15m |
| Color Temperatures |
3000K / 4000K / 6000K |
| Motion Detection |
Dual Motion Sensors |
| Sensor Extension Cable |
2 × 5m |
| Auto-Off Delay |
2 / 10 / 20 / 40 / 60 / 80 seconds |
| Brightness Adjustment |
Supported |
| Animation Speed Adjustment |
Supported |
| Maximum Pixel Setting |
Up to 1024 pixels |
| Controller Dimensions |
223 × 60 × 27mm |
| Advertised LED Lifespan |
50,000 hours |
| Application |
Indoor Staircases and Corridors |
| MOQ |
1 pc |
| Sample Order Lead Time |
3–7 days |
| Mass Order Lead Time |
7–15 days |
Note: Controller capacity and the maximum supported strip configuration must be checked against actual power consumption, voltage drop and pixel settings. Certifications, photometric performance and lifespan claims are subject to verification against the applicable product documents.
Project Applications
Residential Lighting Projects
Suitable for homeowners, renovation contractors and interior lighting designers looking for automatic staircase lighting with decorative effects.
Hospitality Interiors
Can be incorporated into hotel, guesthouse and serviced apartment staircase designs where compatible with the project's lighting and electrical requirements.
Interior Design and Architectural Projects
The flexible COB LED strip allows designers to integrate linear illumination into suitable staircase details and architectural profiles.
Lighting Distributors and Installers
Available in multiple kit lengths and color temperatures for resale, project supply and installation services.
OEM/ODM
USKYLED supports OEM and ODM discussions for distributors, lighting contractors, interior designers and project buyers.
Depending on technical feasibility and order requirements, customization may include:
-
LED strip length and configuration
-
Color temperature selection
-
Controller and sensor configuration
-
Lighting effect and timing requirements
-
Project-specific packaging
-
Private-label branding
-
Installation accessories and compatible aluminum profiles
Please share your staircase dimensions, installation drawings, required quantities and target market so our team can review the most suitable solution.
Order Information
Minimum Order Quantity: 1 pc
Sample Order Lead Time: 3–7 days
Mass Order Lead Time: 7–15 days
Lead times are estimates and depend on order configuration, material availability and confirmed production scheduling.
Request a Quote for Your Staircase Lighting Project
Looking for a reliable 24V motion sensor stair LED strip light kit for a residential or commercial interior project?
Contact USKYLED for product specifications, sample orders, bulk pricing and OEM/ODM inquiries.
Website: www.uskyled.com
Tell us your required strip length, color temperature, project quantity and installation requirements to receive a suitable quotation.
New Products: Intelligent stair light controller with motion sensor
Design: 2 in 1 ( 24V 400W Power Supply + Stair Light Controller integration), installation is more convenient.
Input Voltage: 175V-265V AC ( 220V,230V is working, 110V is not working)
Output: DC 24V
Max Power: 400W
Product size: 223*60*27mm
Sensor A: Used for Upstairs
Sensor B: Used for Downstairs
2pcs Extension Cable Length: 5Meters ( Sensor to controller)
Function:
1. Timer Delay OFF (2s,10s,20s,40s,60s,80s Auto-delay-off adjustable)
2. Brightness & Speed is adjustable
3. Pixel Number is adjustable, Max. up to 1024 Pixels. Strip Length Max. up to 42 Meters.
Compatiable SPI Led Strip Light:
Working Voltage: 24V
LED Type: COB
Chips Qty: 360 Chips/meter
Length: 5M/10M/15M
Color: Warm White 3000K, Natural White 4000K, Cool White 6000K
PCB Width: 10mm
Strip Wire:
Red Wire--- Postive +24V
Green Wire ---- GND signal wire
White Wire ---- Negative -24V
NOTE:
You must read the User Manual for Setting when testing. IF not, Only half led strip working. THAT IS NOT Quality Problem!!!
Step A: Set Pixel Number make sure all diodes are working for the whole led strip.
Step B: Set Strp Order through Pressing RGB/RBG button
Package Including:
1 x 2 in 1 24V 400W Stair Light Controller with Motion Sensor
1 x 24V SPI COB Led Strip Light
