The 16×16mm Flexible LED Wall Washer is a compact linear lighting solution developed for architectural wall washing and curved-surface illumination.
With a 16×16mm profile, the light bar can be integrated into architectural details where a conventional rigid wall washer may be difficult to install. The flexible structure is suitable for columns, arches, curved walls, facade details and other non-linear surfaces.
The current product specification lists DC24V, 16W/m, 48 LEDs/m, SMD 2835 LEDs, 1500 lm/m and Ra90. The standard product is supplied in a 5m roll, with customizable length available.
The product page also lists 3000K, 4000K and 6000K variants, while the technical specification states 3000K, 4000K and 6500K customizable. The final CCT range should therefore be synchronized with the actual SKU configuration before publication.
The compact 16×16mm housing provides a balanced combination of flexibility and optical control.
Unlike conventional rigid LED wall washers, this flexible LED light bar can follow curved architectural surfaces, allowing continuous illumination along:
The product uses a lens-based optical structure to distribute light across the target surface.
The page describes both forward-curved and side-curved optical configurations, making the product suitable for different architectural bending requirements.
The 16×16mm form factor is designed for architectural applications where installation space is limited.
Its compact size makes it easier to integrate into:
The flexible structure allows the LED light bar to follow curved surfaces instead of being limited to straight architectural lines.
This is particularly useful for:
The product uses DC24V, making it suitable for low-voltage architectural linear lighting systems when paired with a compatible 24V LED driver.
The formal product specification lists a power consumption of 16W/m.
The technical specification lists luminous flux of approximately 1500 lm/m, providing a strong linear light source for wall washing and architectural applications.
The product uses SMD 2835 LED chips with 48 LEDs per meter.
The formal specification lists Ra90, making the product suitable for architectural, commercial and display environments where natural color presentation is important.
The technical specification lists IP65 waterproof protection, allowing the product to be considered for protected outdoor architectural applications when the complete installation system is designed accordingly.
The product is supplied as a 5m/roll configuration, with customizable length available according to the technical specification.
The flexible LED wall washer can illuminate vertical surfaces with a continuous linear effect.
It is suitable for:
The flexible construction makes the product suitable for curved architectural surfaces where rigid linear fixtures are difficult to position.
Install the flexible wall washer around columns to create continuous vertical or circular lighting effects.
The flexible form can follow architectural arches and curved openings.
The product can be used for selected facade details and architectural highlighting where a compact waterproof linear fixture is required.
Use the product for retail display walls, feature structures, shop interiors and architectural merchandising areas.
The Ra90 specification can support architectural and display applications where color presentation is important.
Suitable for:
The compact profile can be integrated into cove and indirect lighting structures.
16×16mm
5m/roll
Available according to project requirements.
48 LEDs/m
16W/m
DC24V
Current product options:
The technical specification separately states:
The final product page should use only the CCT values that correspond to the actual available SKU.
Suitable for:
Suitable for:
The page contains both 6000K variant information and 6500K technical information. The final production CCT should be confirmed before this value is used as a fixed SEO specification.
The technical specification lists a 30° luminous angle.
The technical specification also lists 30° × 45°. These optical configurations should be mapped to the correct forward-curved or side-curved product variant before publishing.
The flexible LED wall washer is designed for installation on architectural surfaces using suitable mounting accessories.
Typical installation process:
The current page states that mounting clips are suitable for concrete, drywall and metal substrates.
For outdoor installations, the connectors, end caps, cable entry and power connections should also maintain the required protection level.
| Specification | Details |
|---|---|
| Product Type | Flexible LED Wall Washer |
| Model | ET1616R-48D |
| Profile Size | 16×16mm |
| Standard Length | 5m/roll |
| Custom Length | Available |
| LED Type | SMD 2835 |
| LED Quantity | 48 LEDs/m |
| Power | 16W/m |
| Input Voltage | DC24V |
| Luminous Flux | 1500 lm/m |
| CRI | Ra90 |
| Beam / Optical Angle | 30° / 30×45° |
| CCT | 3000K / 4000K / 6500K customizable* |
| Product Variants | 3000K / 4000K / 6000K shown* |
| IP Rating | IP65 Waterproof |
| Application | Architectural / Commercial / Decorative |
| Installation | Surface / Architectural Mounting |
| Housing / Lens | Flexible lens light-bar structure |
| Bending | Forward Curved / Side Curved |
| MOQ | 1 pcs |
| Sample Lead Time | 3–7 Days |
| Mass Order Lead Time | 7–15 Days |
| OEM/ODM | Available |
There are several inconsistencies on the current product page that should be corrected before the final SEO page is published:
1. IP Rating
The product description says IP67, while the formal specification table says IP65 Waterproof. For the SEO page, use IP65 unless the manufacturer confirms IP67 with test documentation.
2. Beam Angle
The description mentions a 120° beam spread, while the formal product specification lists 30° and 30×45°. The final page should use the verified optical specification rather than combining these values.
3. CCT
The variant selector shows 6000K, while the technical specification says 6500K customizable. This should be unified.
Suitable for architectural wall washing, facade details, columns, arches and decorative structures.
Can be integrated into:
Suitable for:
The Ra90 specification makes the product suitable for selected display and architectural lighting projects.
Suitable for offices, restaurants, commercial buildings and other interior spaces requiring flexible linear lighting.
For protected outdoor architectural applications, the IP65 version can be integrated into selected landscape and facade lighting projects.
USKYLED provides OEM and ODM support for flexible LED wall washer projects.
Customization can include:
For project development, buyers can provide drawings, installation radius, required brightness, CCT, voltage and estimated project quantity for technical evaluation.
MOQ: 1 pcs
Sample Order Lead Time: 3–7 Days
Mass Order Lead Time: 7–15 Days
OEM/ODM: Available
USKYLED can support:
Looking for a 16×16mm flexible LED wall washer for curved walls, architectural facades, columns or commercial lighting projects?
Contact USKYLED for samples, technical specifications, project pricing and OEM/ODM support.
MOQ: 1 pcs | Samples: 3–7 Days | Mass Orders: 7–15 Days | OEM/ODM Available






