150W DALI DT6 Dimmable LED Driver 12V 24V Constant Voltage with Push Dimming for LED Strip Lighting

Product Introduction

The 150W DALI DT6 Dimmable LED Driver is a constant voltage power supply designed for professional LED strip lighting, architectural linear lighting and commercial interior lighting systems.

Available in 12V and 24V versions, this driver combines DALI lighting control with conventional AC push-switch dimming. It offers a practical solution for projects that require both centralized lighting management and straightforward local brightness adjustment.

The LN-150-12-DA and LN-150-24-DA models provide a rated output power of 150W, with a single-channel constant voltage output suitable for compatible LED lighting loads.

A 0.1–100% dimming range allows designers to create subtle low-light scenes as well as full-brightness working environments.

For lighting contractors and system integrators, the combination of DALI DT6 control, push dimming and active power factor correction makes this driver worth considering for professional lighting installations.

Design

Compact Constant Voltage LED Power Supply

The 150W DALI LED driver features a protective housing designed for integration into compatible lighting installations.

Its single-channel constant voltage architecture is intended for LED strips and luminaires requiring a regulated DC 12V or DC 24V supply.

Unlike a constant current driver, which regulates the current supplied to an LED module, this constant voltage driver maintains a specified output voltage for compatible lighting loads.

The Class II insulation design provides an additional electrical safety feature, subject to correct installation and compliance with the manufacturer's requirements.

The product information lists an approximately 200 × 50 × 50mm housing size. Please confirm the final dimensions against the selected model's mechanical drawing before planning the installation.

Main Features

DALI DT6 Lighting Control

The driver supports DALI DT6 dimming, allowing compatible lighting equipment to be integrated into a DALI control network.

DALI control can be useful in buildings where multiple lighting circuits need coordinated brightness adjustment, scene programming and centralized management.

The product information references IEC 62386-101 and IEC 62386-207.

DALI-2 certification status should be confirmed separately through the manufacturer's documentation and relevant certification records.

AC Push-Switch Dimming

In addition to DALI control, the driver supports AC push-switch dimming.

This provides an alternative method of adjusting brightness using a compatible momentary push switch.

It is particularly useful in smaller installations where a complete DALI control network may not be necessary.

0.1–100% Deep Dimming

The driver provides a stated dimming range from 0.1% to 100%.

This wide adjustment range allows lighting designers to create low-brightness scenes for hospitality, decorative lighting and architectural applications.

Actual dimming performance depends on the connected LED load and control configuration.

12V and 24V Output Options

Two constant voltage models are available:

• LN-150-12-DA: DC 12V

• LN-150-24-DA: DC 24V

Select the appropriate model according to the rated operating voltage of the LED strip or luminaire.

Active Power Factor Correction

The driver incorporates an active PFC design with a stated power factor greater than 0.95 under the manufacturer's specified test conditions.

This feature is relevant to commercial lighting installations where electrical performance and power quality are important.

Class II Insulation

The Class II insulation design is intended to provide protection against electric shock through the manufacturer's specified insulation construction.

Correct wiring and installation remain essential.

Multiple Protection Functions

The driver is described as incorporating multiple protection functions for electrical safety and operating reliability.

The exact protection thresholds and recovery behavior should be checked in the technical datasheet.

Five-Year Warranty

The product is advertised with a five-year warranty.

Warranty coverage, exclusions and operating conditions should be confirmed before placing a project order.

Application

LED Strip and Linear Lighting Applications

This 150W DALI dimmable power supply is suitable for compatible constant voltage lighting systems, including:

• 12V LED strip lighting

• 24V LED strip lighting

• Architectural linear lighting

• LED aluminum profile lighting

• Cove lighting

• Commercial ceiling lighting

• Cabinet and shelf lighting

• Hotel corridor lighting

• Retail display lighting

• Decorative indoor lighting

For LED strips installed over longer distances, installers should calculate total connected power and voltage drop before selecting the driver and cable arrangement.

Size / Options

150W 12V DALI LED Driver

Model: LN-150-12-DA

Rated Power: 150W

Output Voltage: DC 12V

Theoretical Maximum Output Current: 12.5A

Suitable for compatible 12V constant voltage LED lighting systems.

150W 24V DALI LED Driver

Model: LN-150-24-DA

Rated Power: 150W

Output Voltage: DC 24V

Theoretical Maximum Output Current: 6.25A

Suitable for compatible 24V constant voltage LED strips and linear lighting fixtures.

The output current figures above are calculated from rated power divided by rated output voltage. They should be checked against the official model datasheets before use as certified specifications.

Product Dimensions

Approximate Listed Size: 200 × 50 × 50mm

Please confirm the actual dimensions, mounting requirements and installation clearances before ordering.

Lighting Options

DALI DT6 Dimming

Integrate the driver with a compatible DALI control system for single-channel brightness control.

AC Push Dimming

Use a compatible momentary push switch to adjust brightness without requiring a complete DALI controller.

12V Constant Voltage Lighting

Choose the 12V model for LED strips and fixtures rated for DC 12V operation.

24V Constant Voltage Lighting

Choose the 24V model for LED strips and fixtures rated for DC 24V operation.

Single-Channel Brightness Adjustment

The driver is designed for one-channel brightness control.

DALI DT6 should not be confused with DALI DT8 tunable white control. For independent warm-white and cool-white channel adjustment, select an appropriate DT8 driver or a compatible multi-channel lighting control solution.

Installation

Installation and Wiring Guidelines

1. Disconnect the AC mains supply before installation.

2. Select the 12V or 24V driver according to the LED lighting load.

3. Calculate the total connected LED power and allow a suitable operating margin.

4. Verify that the AC supply is within the driver's rated input range.

5. Connect the AC input according to the manufacturer's terminal markings and wiring diagram.

6. Connect the LED strip or luminaire to the constant voltage DC output, observing polarity.

7. For DALI operation, connect the DALI bus according to the manufacturer's instructions and configure the device using a compatible DALI controller.

8. For push dimming, connect a compatible momentary switch according to the designated AC push-dimming wiring diagram.

9. Restore power and test the lighting system throughout the required dimming range.

Important Installation Notes

The DALI bus and AC push-switch input are different control interfaces. Do not interchange their wiring terminals.

Do not connect a 12V LED strip to the 24V output model.

Ensure that the installation provides suitable ventilation, electrical protection and access for maintenance.

Electrical installation should be carried out by qualified personnel in accordance with applicable local regulations.

Technical Specifications

Technical specifications are subject to model selection and final manufacturer confirmation.

Project Applications

Commercial Office Lighting

In office environments, DALI lighting control can support coordinated brightness adjustment across suitable lighting zones.

The 150W constant voltage driver can power compatible LED linear lighting systems used in offices, meeting rooms and commercial interiors.

Hotel and Hospitality Lighting

Hotels frequently use indirect lighting, cove lighting and architectural LED strips to create comfortable interior environments.

The wide dimming range allows lighting designers to develop different brightness scenes for corridors, guest areas and decorative installations.

Retail and Showroom Lighting

Retail stores and showrooms often combine general lighting with illuminated shelves, display cabinets and decorative linear lighting.

The driver can be considered for suitable 12V or 24V LED strip installations requiring DALI brightness control.

Residential Architectural Lighting

In high-end residential projects, DALI-controlled linear lighting can be incorporated into cove lighting, ceiling details and architectural features.

The push-dimming interface may also provide a simpler local control option where appropriate.

OEM Lighting Manufacturing

Lighting manufacturers can evaluate the 12V and 24V models for integration into compatible constant voltage luminaires and linear lighting assemblies.

OEM/ODM

DALI LED Driver Supply and Project Support from USKYLED

USKYLED supplies LED drivers, lighting controls, LED strips and architectural lighting products for international lighting projects.

We welcome inquiries from electrical contractors, lighting manufacturers, system integrators, importers and distributors.

For OEM/ODM and project sourcing, please contact our team to discuss:

• 12V and 24V driver selection

• DALI lighting control compatibility

• LED strip power calculations

• Project quantity requirements

• Technical datasheets and wiring diagrams

• Certification documentation

• Product samples

• Bulk order pricing

• OEM/ODM feasibility

Ordering Information

Minimum Order Quantity: 1 Piece

Sample Order Lead Time: 3–7 Days

Mass Order Lead Time: 7–15 Days

Available Models: LN-150-12-DA / LN-150-24-DA

Warranty: 5 Years (Subject to Manufacturer Warranty Terms)

Lead times are estimates and should be reconfirmed according to order quantity, stock availability and customization requirements.

Request a Quote for 150W DALI Dimmable LED Drivers

Looking for a 150W DALI DT6 constant voltage LED driver for your next lighting project?

Contact USKYLED with your required output voltage, connected LED load, control system and estimated order quantity.

Our team can help you review suitable driver options, sample availability and B2B purchasing requirements.

Website: https://www.uskyled.com

Contact USKYLED for product specifications, sample orders and wholesale quotations.